Intech 2400-A16 – Remote Station / Intelligent Multiplexer / Remote I/O
 
Search
Menu Close

Intech 2400-A16 – Remote Station / Intelligent Multiplexer / Remote I/O

Up to 16 Isolated Universal Analogue Inputs, 4 Dedicated Digital Inputs, 2 Relay Outputs, 2 Analogue 4~20mA Outputs
Part Number: 2400-A16
Manufacturer:
0Types Available
Back to Previous Page

Monitor your process with precision

This station has all the friendly features of a monitoring station. The Isolated Universal Analogue Inputs are software programmable using the user friendly MicroScan SCADA (Version 5.1 or later), or Station Programmer software. Each input can be configured for any of the following inputs: RTD Pt100/Pt1000, Thermocouple, mA, mV, V & Pulse/Digital. There is a convenient wide choice of spans plus Custom spans can be configured also. The accuracy does not alter when changing spans.

The analogue inputs on the 2400-A16 can be expanded up to 76 using the 2100-M Input Multiplexers.


All 2400-A16 stations come standard (Default ex factory calibration) with:

  • All Input Channels Configured to RTD Pt100 0~100°C
  • 4 Dedicated Digital Inputs
  • 2 Analogue 4~20mA Outputs
  • 2 Relay Outputs
  • RS485 or RS232 on Comms Port 2


Features

  • Up to 16 Isolated Universal Analogue Inputs, with Plug In Terminals
  • Each Input Individually Selected & Scaled
  • 16 Bit Resolution
  • Isolated Input for RTD, T/C, mA, mV, V & Pulse/Digital
    • RTD: Pt100/Pt1000, -200~320°C to -200~800°C / (-320~1560°F)
    • T/C: B, E, K, J, N, R, S, T, with CJC
    • mA: 0~20mA, 0~2.5mA
    • mV: -25~25mV to -200~200mV
    • V: 0~1V to 0~15V
    • Pulse/Digital: Meter pulses, Counting and Frequency. Max speed 2500Hz
  • Four Dedicated Digital, Isolated, Optocoupler Inputs
    • State or Count
    • Max speed 8000Hz
  • Two Analogue, Isolated, 4~20mA Outputs
  • Two Digital, Isolated, Relay Outputs
  • Comms Ports (also note the protocol information listed below):
    • Port 1: Isolated RS422/RS485 or Ethernet TCP/IP (option)
    • Port 2: Isolated RS232/RS485
    • USB programming port via XU-USB programming key
  • Embedded protocols, Auto Detecting:
    • MicroScan ASCII
    • Modbus RTU
    • Modbus TCP
  • RS422/RS485 Up to 1200m
  • Cost Effective Radio Installation
  • Cost Effective PC or PLC AI Expansion
  • Clock/Reset Drive up to Four 2100-M input expansion
  • Selectable Baud Rates
  • Integral MODBUS Bridge to MicroScan data: 256 analogue (words), and 128 digital (bits)
  • Average comms message, RS232, RS422, RS485, Ethernet = 100msec
  • 4 messages required to read all inputs
  • Internal memory refresh rate for all channels = 1 sec
  • Interface for 2400-R2 (16 & 32 Relay output expansion)
  • Stand-alone memory logging option with 2400-A16-SD-NET
  • Easy Programming
  • Programmable Station Number
  • Programmable Relay States – NO or NC
  • Comms Failure Time-out Using Relay 2
  • Comms TXE Delay Programming
  • Programming Information Retained on Power Down
  • Universal AC/DC Power Supply (three options to select)
  • Compact 35mm DIN Rail Mounting
  • Easy to Install


New Web Interface

Now with the addition of the popular EZEio web interface controller whoch connects directly to the 2400-A16 for viewing your data on a secure web page. 

Learn More >>

Station Programmer Configuration Software

Includes XPort® Ethernet converter configuration.

Download >>


XU-USB (USB Programming Key)

This is required for programming 2400-A16 using Station Programmer software.

Learn More >>

Technical Information

Type

2400-A16

Inputs 1~16 Specifications: Analogue or Digital.
Inputs 1~16 Analogue Specifications: 16 Individually Isolated Universal or Non-Isolated RTD Analogue Inputs.
Input Resolution 16 Bits, 50,000 Steps Average (some ranges may differ).
Input Isolation 2500Vac for 1 minute between All Input Channels.

Voltage Input Specifications:

Input Impedance >500KΩ on all ranges.
mV Maximum Over-range 3Vdc Continuous.
V Maximum Over-range 24Vdc Continuous.
mV Range -200~200mV.
V Range 0~1V, 0~15V.
Accuracy 0.1% FSO Max.
Linearity and Repeatability 0.1% FSO Max.
Channel Separation 0.001% Max.
Ambient Drift 0.003%/°C FSO Typical.
Noise Immunity (CMRR) 160dB Tested @ 300Vrms 50Hz.
RF Immunity 1% effect FSO Typical.

Current Input Specifications:

Minimum Recommended Span 0~1mA (gives 1000 steps on output).
Input Impedance 45Ω.
Maximum Over-range Protected by PTC Up to 24Vdc Max.
mA Range 0~20mA (4~20mA).
Accuracy 0.1% FSO Max.
Linearity and Repeatability 0.1% FSO Max.
Channel Separation 0.001% Max.
Ambient Drift 0.003%/°C FSO Typical.
Noise Immunity (CMRR) 160dB Tested @ 300Vrms 50Hz.
RF Immunity 1% effect FSO Typical.

Thermocouple (T/C) Input Specifications:

Thermocouple Types B, E, J, K, N, R, S, T.
Input Impedance >500KΩ.
T/C Lead Resistance 100Ω Max.
Cold Junction Compensation. -10~60°C.
CJC Drift 0.02°C/°C For Installation Upright.
Accuracy 0.1% of FSO ±1°C Typical.
Sensor Fail Upscale or Downscale Selectable (Upscale Default).
Type B Range 0~1800°C (30~3270°F).
Type E Range -200~800°C (-320~1470°F).
Type J Range -200~1000°C (-320~1830°F).
Type K Range -200~1300°C (-320~2370°F).
Type N Range -200~1300°C (-320~2370°F).
Type R Range 0~1700°C (30~3090°F).
Type S Range 0~1700°C (30~3090°F).
Type T Range -200~400°C (-320~750°F).

RTD Input Specifications:

Pt100 RTD Type 3 Wire Pt100 RTD DIN 43760:1980 Standard Input.
Pt1000 RTD Type 3 Wire Pt1000 RTD Standard Input.
Sensor Current 0.6mA Continuous.
Lead Wire Resistance Pt100: 10Ω/wire Max.
Pt1000: 5Ω/wire Max.
0.1% FSO Offset Error per Ω of Lead Resistance.
Sensor Fail Upscale or Downscale Selectable (Upscale Default).
Ambient Drift 0.003°C/°C Typical.
Accuracy 0~300°C ±0.1°C.
0~850°C ±0.3°C, Isolated Channels Only.
Resolution 0.01°C for -200~250°C, (-140~210°F).
0.1°C for -200~850°C (-320~1560°F), Isolated Channels Only.
Inputs 1~16 Pulses & Frequency: Meter Pulses, Frequency, Counter or On/Off State Inputs.
Input Type Clean Contact, Open Contact - NPN, PNP.
Accuracy ±0.5%.
Frequency Range 0~2500Hz.
Frequency Resolution 0.1Hz.
Fast Counter Range 0~2500Hz.
Maximum Amplitude 0~5Vdc
Debounce 0~50Hz Max.
Counter Register Output 32bit.
Dedicated Digital Input 1~4 Specifications: 4 Opto Isolated Digital Inputs with LED Indication On Each Input.
Applications Meter Pulses, Frequency, Counter or On/Off State Inputs.
Functions Up Count On Each Pulse.
Input Voltage 5~30Vdc.
Threshold 4.6V typical.
Load @ 5V 1.1mA per Channel.
Load @ 24Vdc 7.0mA per Channel.
Counter Register Output 32bit.
 Frequency Range 0~8000Hz.
Frequency Debounce 5msec.
Debounce Counter Range 0~100Hz.

2400-A16 Output Specifications.

Dual Analogue Outputs Source: 2 Isolated Analogue Outputs (not isolated from each other).
mA Range 4~20mA Only.
Resolution 12bit, 4096 steps.
Output Drive 500Ω Max @ 24V Supply.
Relay Outputs: 2 Isolated Relays with LED Indication On Each Output.
Functions 2 on Board Controllers (16 with 2400-R2), can be used as Set Point (SV),
Switching Differential, Auto/Manual, Manual Output Setting, Dual Action Control,
Single Action Control, Heat/Cool, Cool Only, Heat Only.
Contact Material Gold Clad Silver.
Relay Ratings 30Vdc, 3A Max.
Approved to Standard UL.

2400-A16 General Specifications.

Comms Ports:
Port 1 RS422/RS485.
Port 2 RS232/RS485.
Ethernet TCP/IP Port (optional) Lantronix XPort® (Replaces Comms Port 1).
Data Rate 9600 (MicroScan), 19200, 57600 or 115200 baud.
Parity bit Even or None (MicroScan).
Protocols ASCII. Std (MicroScan), Modbus RTU/TCP Auto Detect.
Power Options: 10VA.
Factory Set: H 85~265Vac, 95~370Vdc.
Factory Set: M 24~48Vac, 17~72Vdc.
Factory Set: L 10~30Vdc (recommend 1A power supply).

Safety Compliance:

EMC Emissions EN55022-A.
EMC Immunity EN50082-1.
Safety EN60950.
Mains isolation 250Vac.
Isolation test voltages:
Mains to output 3000Vac, 50Hz.
Mains to earth 1500Vac, 50Hz.

General Specifications:

Accurate to ≤ ±0.1%/°C FSO typical.
Linear Repeatability ≤ ±0.1%/°C FSO typical.
 Ambient drift ≤ ±0.01%/°C FSO typical.
  Isolation Test Voltages Between Input and Output: 3750Vac for 1min.
Response Time 400msec Typical (10~90% 300msec Typical).
Noise Immunity 125dB CMRR Average (2.0kVdc Limit).
RF immunity < 1% effect FSO typical.
Operating temperature 0~60°C.
Storage temperature -20~80°C.
Operating humidity 5~85% RH max.
Housing: Material ABS Inflammability V0 (UL94).
Mounting 35mm symmetrical DIN rail.
Dimensions L=255, W=145, H=60mm.
Weight 0.9kg Includes Packaging.

Item

Code

Description

Series 2400-A16-
Input Channel Options I16- 16 Isolated Universal Input Channels
I8- 8 Isolated Universal Input Channels
Comms Options (Port 1) 485- Port 1 Fitted with RS422/RS485 Comms
NET- Port 1 Fitted with Ethernet TCP/IP Comms
Power Supply Options H 85~265Vac, 95~370Vdc
M 24~48Vac, 17~72Vdc
L 10~30Vdc

Monitor your process with precision

This station has all the friendly features of a monitoring station. The Isolated Universal Analogue Inputs are software programmable using the user friendly MicroScan SCADA (Version 5.1 or later), or Station Programmer software. Each input can be configured for any of the following inputs: RTD Pt100/Pt1000, Thermocouple, mA, mV, V & Pulse/Digital. There is a convenient wide choice of spans plus Custom spans can be configured also. The accuracy does not alter when changing spans.

The analogue inputs on the 2400-A16 can be expanded up to 76 using the 2100-M Input Multiplexers.


All 2400-A16 stations come standard (Default ex factory calibration) with:

  • All Input Channels Configured to RTD Pt100 0~100°C
  • 4 Dedicated Digital Inputs
  • 2 Analogue 4~20mA Outputs
  • 2 Relay Outputs
  • RS485 or RS232 on Comms Port 2


Features

  • Up to 16 Isolated Universal Analogue Inputs, with Plug In Terminals
  • Each Input Individually Selected & Scaled
  • 16 Bit Resolution
  • Isolated Input for RTD, T/C, mA, mV, V & Pulse/Digital
    • RTD: Pt100/Pt1000, -200~320°C to -200~800°C / (-320~1560°F)
    • T/C: B, E, K, J, N, R, S, T, with CJC
    • mA: 0~20mA, 0~2.5mA
    • mV: -25~25mV to -200~200mV
    • V: 0~1V to 0~15V
    • Pulse/Digital: Meter pulses, Counting and Frequency. Max speed 2500Hz
  • Four Dedicated Digital, Isolated, Optocoupler Inputs
    • State or Count
    • Max speed 8000Hz
  • Two Analogue, Isolated, 4~20mA Outputs
  • Two Digital, Isolated, Relay Outputs
  • Comms Ports (also note the protocol information listed below):
    • Port 1: Isolated RS422/RS485 or Ethernet TCP/IP (option)
    • Port 2: Isolated RS232/RS485
    • USB programming port via XU-USB programming key
  • Embedded protocols, Auto Detecting:
    • MicroScan ASCII
    • Modbus RTU
    • Modbus TCP
  • RS422/RS485 Up to 1200m
  • Cost Effective Radio Installation
  • Cost Effective PC or PLC AI Expansion
  • Clock/Reset Drive up to Four 2100-M input expansion
  • Selectable Baud Rates
  • Integral MODBUS Bridge to MicroScan data: 256 analogue (words), and 128 digital (bits)
  • Average comms message, RS232, RS422, RS485, Ethernet = 100msec
  • 4 messages required to read all inputs
  • Internal memory refresh rate for all channels = 1 sec
  • Interface for 2400-R2 (16 & 32 Relay output expansion)
  • Stand-alone memory logging option with 2400-A16-SD-NET
  • Easy Programming
  • Programmable Station Number
  • Programmable Relay States – NO or NC
  • Comms Failure Time-out Using Relay 2
  • Comms TXE Delay Programming
  • Programming Information Retained on Power Down
  • Universal AC/DC Power Supply (three options to select)
  • Compact 35mm DIN Rail Mounting
  • Easy to Install


New Web Interface

Now with the addition of the popular EZEio web interface controller whoch connects directly to the 2400-A16 for viewing your data on a secure web page. 

Learn More >>

Picture of Intech Micro Remote Station, 16 Isolated Universal Input Channels
$2,471.00 ex GST
i h
Picture of Intech Micro Remote Station, 16 Isolated Universal Input Channels, Low Voltage Supply
$2,586.00 ex GST
i h
Picture of Intech Micro Remote Station, 16 Isolated Universal Input Channels, Ethernet
$2,876.00 ex GST
i h
Picture of Intech Micro Remote Station, 16 Isolated Universal Input Channels, Ethernet, Low Voltage
$2,991.00 ex GST
i h