Search
Menu Close

Procon PT8AIIS - 8 Current Input Module Fully Isolated (TCP)

Manufacturer:
The PT8AIIS is a 8 channel current input module. The inputs are fully isolated from input to logic and between inputs. This module is ideal for monitoring existing 4-20mA current loops which are isolated from each other and cannot be connected to a common point of reference.
Part Number: PT8AIIS
Back to Previous Page
Product Files
$412.00 ex GST
i h

The PT8AIIS is a 8 channel current input module. The inputs are fully isolated from input to logic and between inputs. This module is ideal for monitoring existing 4-20mA current loops which are isolated from each other and cannot be connected to a common point of reference.

The standard setting for the PT8AIIS module is 0 – 20mA input current which represents an output value of 0 – 4095 (12 bits) in the corresponding Modbus register. To obtain an output value of 0 to 4095 for an input signal of 4 to 20mA the offset switch is switched on. This module can also be configured for a 0 – 20.000mA input range or +/- 20.000mA input.


PROMUX TCP (TCP/IP I/O Modules)

PROMUX TCP is an innovative modular I/O system which provides a simple solution for distributed I/O requirements.

The PROMUX TCP system consists of stand-alone Digital and Analog Input and Output modules which are connected together on an ETHERNET 10/100Base-T network using the MODBUS TCP protocol.

The PROMUX TCP modules also have built in web servers. This enables configuration and diagnostic data to be accessed via a standard web browser.

All PROMUX TCP modules plug directly onto an industry standard DIN rail. All modules have isolation between the field and logic.

Technical Information

Analog Inputs 8
Type Differential
Current

0-20mAdc

Resolution 16 bit
Sample rate 0.71 samples/sec
Input Impedance 22 Ohms
Isolation (Inter Channel) 350VAC (Pk-Pk)
Drift 100 ppm/deg.C typ.
Accuracy 0.2 % of span
Isolation (Field & Logic) 1500VAC RMS

The PT8AIIS is a 8 channel current input module. The inputs are fully isolated from input to logic and between inputs. This module is ideal for monitoring existing 4-20mA current loops which are isolated from each other and cannot be connected to a common point of reference.

The standard setting for the PT8AIIS module is 0 – 20mA input current which represents an output value of 0 – 4095 (12 bits) in the corresponding Modbus register. To obtain an output value of 0 to 4095 for an input signal of 4 to 20mA the offset switch is switched on. This module can also be configured for a 0 – 20.000mA input range or +/- 20.000mA input.


PROMUX TCP (TCP/IP I/O Modules)

PROMUX TCP is an innovative modular I/O system which provides a simple solution for distributed I/O requirements.

The PROMUX TCP system consists of stand-alone Digital and Analog Input and Output modules which are connected together on an ETHERNET 10/100Base-T network using the MODBUS TCP protocol.

The PROMUX TCP modules also have built in web servers. This enables configuration and diagnostic data to be accessed via a standard web browser.

All PROMUX TCP modules plug directly onto an industry standard DIN rail. All modules have isolation between the field and logic.

Customers who bought this item also bought

Procon PT6RTD - 6 RTD Input Module (TCP)

The PT6RTD module is a 6 RTD input module. The module can accommodate either 2 or 3 wire RTD sensors. The RTD inputs are isolated from the logic.
$362.00 (ex gst)

Procon PT8AOI - 8 Current Output Module (TCP)

The PT8AOI is a 8 channel current output module. Each channel can be set to output a current in the range 0 – 20mA. The outputs are isolated from the logic and share a common negative terminal.
$404.00 (ex gst)