Search
- Data Loggers
-
Sensors
- Air Quality Monitors
- Cables Plugs and Accessories
- Calibrators
- Combustion Gas Analysers
- Compressed Air & Gas Measurement
- Gas Detection and Monitoring
- Handheld Instruments
- Humidity Sensors
- HVAC Sensors
- Infrared Thermometers and Thermal Imaging
- LoRaWAN Sensors & Gateways
- Level & Flow Measurement
- Moisture in Dry Air and Gas - Dew Point
- Opacity and Dust Monitors
- Pressure Measurement
- Safety Alarming and Monitoring
- Temperature Sensors
- Water Analysis Instruments
- Wireless Systems
- Controllers
- Recorders
- IoT
- Applications
-
Manufacturers
- Support
Procon Electronics
Display
per page
Procon PM16DI - 16 Digital Input Module (RS485)
PROMUX is an innovative modular I/O system which provides a simple low cost solution for distributed I/O requirements.
$196.00 (ex gst)
Procon PM16DO - 16 Digital Output Module (RS485)
This module has 16 open collector (NPN) digital outputs. The outputs may be used to drive lamps or external relays when more drive capability is required.
$196.00 (ex gst)
Procon PM4RO - 4 Relay Output Module (RS485)
The PM4RO module has 4 normally open/ normally closed relay outputs. These modules may be used when a higher drive capability is required, or when isolation between outputs are required.
$196.00 (ex gst)
Procon PM6RTD - 6 RTD Input Module (RS485)
The PM6RTD module is a 6 RTD input module. The module can accommodate either 2 or 3 wire RTD sensors. The RTD inputs are isolated from the logic.
$304.00 (ex gst)
Procon PM8AI/I - 8 Current Input Module (RS485)
The PM8AI/I is a 8 channel current input module. The inputs are isolated from the logic and share a common negative terminal.
$264.00 (ex gst)
Procon PM8AI/I ISO - 8 Current Input Module Fully Isolated (RS485)
The PM8AI/I ISO is a 8 channel current input module. The inputs are fully isolated.
$346.00 (ex gst)
Procon PM8AI/V - 8 Voltage Input Module (RS485)
The PM8AI/V is a 8 channel voltage input module. The inputs are isolated from the logic and share a common negative terminal.
$264.00 (ex gst)
Procon PM8AI/V ISO - 8 Voltage Input Module Fully Isolated (RS485)
The PM8AI/V ISO is a 8 channel voltage input module. The inputs are fully isolated from input to logic and between inputs.
$346.00 (ex gst)
Procon PM8AO - 8 Current Output Module (RS485)
The PM8AO is a 8 channel current output module. Each channel can be set to output a current in the range 0 – 20mA.
$292.00 (ex gst)
Procon PM8DIO - 8 Digital Input/ Output Module (RS485)
The PM8DIO module is an 8 channel digital input and 8 channel digital output module.
$196.00 (ex gst)
Procon PM8TC - 8 Thermocouple Input Module (RS485)
The PM8TC module is a 8 thermocouple input module.
$296.00 (ex gst)
Procon PM8TC ISO - 8 Thermocouple Input Module Isolated (RS485)
The PM8TCISO module is a 8 isolated thermocouple input module.
$388.00 (ex gst)
Procon PM8VO - 8 Voltage Output Module (RS485)
The PM8VO is a 8 channel voltage output module. Each channel can be set to output a voltage in the range 0 – 10V.
$292.00 (ex gst)
Procon PMDAIO - Universal I/O – 2 RTD, 2 AI, 1 AO, 4 DI, 2 DO (RS485)
The PMDAIO module is a multipurpose combination of inputs and outputs. The module can accommodate either 2 or 3 wire RTD sensors, current (0-20mA) and voltage (0-10V) inputs, current (0-20mA) or voltage (0-10V) output, and digital inputs and outputs.
$382.00 (ex gst)
Procon PMDAIO2 - Universal I/O – 2 AI, 2 AO, 4 DI, 4 DO (RS485)
The PMDAIO2 module is a multipurpose combination of inputs and outputs. The module can accommodate either current (0-20mA) or voltage (0-10V) inputs, current (0-20mA) outputs, and digital inputs and outputs.
$378.00 (ex gst)
Procon PT16DI - 16 Digital Input Module (TCP)
The PT16DI module is a 16 channel digital input module. The inputs are isolated from the logic by bi-directional opto-couplers. The inputs are divided into 2 isolated groups of 8 inputs each. This allows for many configurations in which the input module may be used.
$276.00 (ex gst)
Procon PT16DIB - 16 Digital Input Module with Non-Volatile Counters (TCP)
The PT16DIB module is a 16 channel digital input module. The inputs are isolated from the logic by bi-directional opto-couplers. The inputs are divided into 2 isolated groups of 8 inputs each. This allows for many configurations in which the input module may be used.
$300.00 (ex gst)
Procon PT16DO - 16 Digital Output Module (TCP)
This module has 16 open collector (NPN) digital outputs. The outputs may be used to drive lamps or external relays when more drive capability is required. The outputs are isolated from the logic and they share a common negative terminal.
$288.00 (ex gst)
Procon PT4RO - 4 Relay Output Module (TCP)
The PT4RO module has 4 normally open/ normally closed relay outputs. These modules may be used when a higher drive capability is required, or when isolation between outputs are required.
$282.00 (ex gst)
Procon PT6RTD - 6 RTD Input Module (TCP)
The PT6RTD module is a 6 RTD input module. The module can accommodate either 2 or 3 wire RTD sensors. The RTD inputs are isolated from the logic.
$362.00 (ex gst)
Procon PT8AIIS - 8 Current Input Module Fully Isolated (TCP)
The PT8AIIS is a 8 channel current input module. The inputs are fully isolated from input to logic and between inputs. This module is ideal for monitoring existing 4-20mA current loops which are isolated from each other and cannot be connected to a common point of reference.
$412.00 (ex gst)
Procon PT8AIVS - 8 Voltage Input Module Fully Isolated (TCP)
The PT8AIVS is a 8 channel voltage input module. The inputs are fully isolated from input to logic and between inputs. This module is ideal for monitoring voltages which are isolated from each other and cannot be connected to a common point of reference.
$422.00 (ex gst)
Procon PT8AOI - 8 Current Output Module (TCP)
The PT8AOI is a 8 channel current output module. Each channel can be set to output a current in the range 0 – 20mA. The outputs are isolated from the logic and share a common negative terminal.
$404.00 (ex gst)
Procon PT8AOV - 8 Voltage Output Module (TCP)
The PT8AOV is a 8 channel voltage output module. Each channel can be set to output a voltage in the range 0 – 10V. The outputs are isolated from the logic and share a common negative terminal.
$392.00 (ex gst)
Procon PT8DIO - 8 Digital Input/Output Module (TCP)
The PT8DIO module is an 8 channel digital input and 8 channel digital output module.
$282.00 (ex gst)
Procon PT8TCS - 8 Thermocouple Input Module Isolated (TCP)
The PT8TCS module is a 8 isolated thermocouple input module. The module uses differential inputs to reduce effects of electrical noise and mains pickup. The thermocouple inputs are isolated from the logic and from each other.
$414.00 (ex gst)
Procon PT-E- Modbus TCP Gateway (TCP)
The PT-E GATEWAY is an Ethernet to serial converter and connects the PROMUX modules to a 10/100 Base-TX Ethernet network.
call for pricing
Quality Guaranteed
Safe & Secure Payments
Quality Guaranteed