Personal menu

Calex PyroCouple Series Infrared Thermometer

Manufacturer:

The PyroCouple is a simple infrared temperature sensor suitable for non-contact temperature measurement on various surfaces between -20°C to 500°C. This general Purpose Infrared Temperature Sensor offers an Analogue Output

Part Number: PyroCouple

Select Range and Optics *

Accessories

FBS-Fixed Mount Bracket [+$27.00]
ABS-Adjustable Mount Bracket [+$60.00]
APSW-Air Purge for 2:1 [+$98.00]
APSN-Air Purge for 15:1 and 30:1 [+$111.00]

Back to Previous Page

Product Files

$0.00 ex GST

Qty:

i h

Overview
Field of View
Applications
Specifications

Non-Contact Infrared Temperature Sensor with Analogue Outputs

The PyroCouple is a simple infrared temperature sensor with a choice of analogue outputs. No complicated setup is required - just connect a temperature indicator and power supply, and instantly start taking measurements. It is suitable for non-contact temperature measurement on most non-reflective non-metal surfaces, such as paper, thick plastics, asphalt, painted surfaces, food, rubber and organic materials, among many others.

PyroCouple non-contact infrared sensors measure temperatures from -20°C to 500°C and provide either a linear 4 to 20 mA output, a voltage output or a thermocouple output. This range of output signals is compatible with almost any indicator, controller, recorder, data logger etc., without the need for special interfacing or signal conditioning. They are suitable for most materials such as food, paper, textiles, plastics, leather, tobacco, pharmaceuticals, chemicals, rubber, coal and asphalt; but not materials with a low emissivity, for example polished metals. Two-wire and four-wire versions are available:

Two-wire PyroCouple sensors transmit the target temperature as a 4-20 mA output and offer a simple solution for most applications.

Four-wire PyroCouple sensors transmit the target temperature as a 0-50 mV or thermocouple output (type J or K) plus the internal sensor temperature as a 4-20 mA output. This second output can be used to ensure that the sensor is being operated within the correct ambient temperature limits and prevent damage caused by overheating or overcooling. It can also be used to give an approximate indication of the air temperature surrounding the sensor.

Features:

Temperature ranges from -20°C to 500°C
Two-wire 4-20 mA output or four-wire voltage/ thermocouple output
Choice of precision optics for large or small targets
Fast response with high stability
Stainless steel housing, sealed to IP65
Quick and easy installation
Wide range of accessories
Fixed emissivity 0.95 for measuring non-reflective non-metals, and painted surfaces (including painted or coated metals)
Conforms to industrial EMC standards
Ideal for measuring non-reflective non-metals, or painted metal surfaces
Not designed or approved for fever detection

Please note: The given measured spot size contains 90% of the energy detected by the sensor. We normally recommend the target is at least twice as large as the given measured spot for maximum accuracy. Sensors may be used at longer distances than the above diagrams show. There is no maximum measurement distance in clean air; this is because the PyroCouple detects only the wavelengths of infrared radiation that are not absorbed by the atmosphere.

Infrared Temperature Measurement in Paint Curing

In the painting of products such as automobile body panels, long term durability and consumer appeal depend on the quality of the coating application processes. This quality, determined by adhesion, hardness, corrosion reistance, finish and colour, depends largely upon curing temperature cycles. Calex's non-contact infrared temperature sensors are capable of giving the user or OEM tight control over this cycle, where none existed before.

Learn More >>

Asphalt Temperature Measurement in Road Laying

The PyroCouple Series of infrared temperature sensors is ideal for measuring temperature of the road surface before and after tarmac is laid.

Learn More >>

Measuring Gas Cylinder Temperature During Filling

Infrared temperature sensors from Calex Electronics have been used with success for over 7 years be a leading provider of packaged gas for measuring the temperature of gas cylinders as they are filled.

Learn More >>

From stargazing to drinks dispense; Infrared thermometers in compressed gases

Dr. Peter Watters explains several case studies in monitoring gas cylinder temperatures with infrared thermometers and looks at potential future applications

Learn More >>

Technical Information
Temperature Range	-20°C to 100°C (LT models) 0°C to 250°C (MT models) 0°C to 500°C (HT models)
Optics	Choice of optics for small or large targets at short or long distances - see Field of View Diagrams
Output (Measured Temperature)	Two-wire 4-20 mA (-0 models) 0-50 mV (-1 models) Type J Thermocouple (-3 models) Type K Thermocouple (-4 models)
Output (Sensor Body Temperature)	4-20 mA on power loop (models with output options 1 to 4 only)
Accuracy	±1% of reading or ±1ºC, whichever is greater
Repeatability	± 0.5% of reading or ± 0.5ºC, whichever is greater
Emissivity	Fixed at 0.95
Response Time, t90	240 ms (90% response)
Spectral Range	8 to 14 μm
Supply Voltage	24 V DC (28 V DC max.)
Min. Sensor Voltage	6 V DC
Max. Loop Impedance	900 Ω ( 4-20 mA output)
Output Impedance	56 Ω (voltage/thermocouple output)
Mechanical Specifications
Construction	Stainless Steel
Dimensions	18 mm diameter x 103 mm long
Thread Mounting	M16 x 1 mm pitch
Cable Length	1m (longer lengths available to order)
Weight with Cable	95 g
Environmental
Environmental (IP) Rating	IP65
Ambient (Operating) Temperature Range	0°C to 70°C
Ambient (Operating) Humidity	95% max. non-condensing
Electromagnetic Compatibility Standards
EN61326-1, EN61326-2-3 (Electrical Equipment for Measurement, Control and Laboratory Use – EMC Requirements – Industrial)

Non-Contact Infrared Temperature Sensor with Analogue Outputs

Two-wire PyroCouple sensors transmit the target temperature as a 4-20 mA output and offer a simple solution for most applications.

Features:

Temperature ranges from -20°C to 500°C
Two-wire 4-20 mA output or four-wire voltage/ thermocouple output
Choice of precision optics for large or small targets
Fast response with high stability
Stainless steel housing, sealed to IP65
Quick and easy installation
Wide range of accessories
Fixed emissivity 0.95 for measuring non-reflective non-metals, and painted surfaces (including painted or coated metals)
Conforms to industrial EMC standards
Ideal for measuring non-reflective non-metals, or painted metal surfaces
Not designed or approved for fever detection

Customers who bought this item also bought

Pixsys ATR144 Controller

Pixsys ATR144 Process Controller is a newly released controller in the 32x74mm size. It is programmable via NFC, control and alarm functions, programmable analogue input, multi-voltage power supply, digital input, serial communication.

$256.00 (ex gst)

Calex ABS - Small Adjustable Mounting Bracket

The adjustable mounting bracket consists of a fixed mounting bracket plus another L-shaped bracket. When assembled as shown the adjustable mounting bracket offers a rigid support for the sensor and allows fine adjustment in two planes.

$60.00 (ex gst)

Calex PyroCouple Series Infrared Thermometer

Non-Contact Infrared Temperature Sensor with Analogue Outputs

Features:

Infrared Temperature Measurement in Paint Curing

Asphalt Temperature Measurement in Road Laying

Measuring Gas Cylinder Temperature During Filling

From stargazing to drinks dispense; Infrared thermometers in compressed gases

Technical Information

Mechanical Specifications

Environmental

Electromagnetic Compatibility Standards

Non-Contact Infrared Temperature Sensor with Analogue Outputs

Features:

Pixsys ATR144 Controller

Calex ABS - Small Adjustable Mounting Bracket

Quality Guaranteed

Safe & Secure Payments

Quality Guaranteed