Search
Menu Close

HOBO - 4-Channel Pulse Data Loggers

Manufacturer:
The HOBO UX120 Pulse Logger is a highly versatile, 4-channel energy data logger that combines the functionality of four separate data loggers into one compact unit. It enables energy management professionals – from energy auditors to building commissioners – to easily track building energy consumption, equipment runtimes, and water and gas flow rates.
Part Number: UX120-017
Back to Previous Page
$442.00 ex GST
i h

Limited Stocks Available

A highly versatile, 4-channel energy data logger that combines the functionality of four separate loggers into one compact unit. Enables energy management professionals, from energy auditors to building commissioners, to easily track building energy consumption, equipment runtimes, and water and gas flow rates. This logger has a standard memory capable of 500,000 measurements, and is also available in an expanded memory version, the HOBO UX120-017M, capable of over 4,000,000 measurements.


Features

  • Simultaneously measures and records pulse signals, events, state changes, and runtimes
  • Stores up to over 4 million measurements, enabling longer deployments with fewer site visits
  • Maximum pulse rate – 120 Hz
  • Pulse input range – 0 to 24VDC
  • Streamlines deployment via a range of start/stop options, logger status LEDs, and high-speed USB 2.0 data offload
  • Compatible with HOBOware and HOBOware Pro software for logger setup and graphing & analysis


Important Information

Requires HOBOware software and a USB cable. (Note: A USB cable is included w/HOBOware Pro CD or USB software purchase). See compatible items below.

HOBO Pulse Data Loggers UX120

Learn the features of this data logger used by energy professionals. The UX120 logger provides four channels for simultaneously reading pulse, event, state change, and run time. The product is compatible with a variety of pulse input sensors for measuring power factor, watt-hours, and other electrical readings.  This logger comes with two memory options: 500,000 & 4,000,000 readings. Also available are start/stop options and operation confirmation LED lights.


Technical Information

Inputs

External Contact Input Electronic solid state switch closure or logic driven digital signals to
24 V
Maximum Pulse Frequency 120 Hz
Maximum State, Event,
Runtime Frequency
1 Hz
Bits 4–32 bits depending on pulse rate and logging interval
Maximum Pulses Per
Interval
7,863,960 (using maximum logging rate)
Driven Logic Signal Input Low: ≤ 0.4 V; Input High: 3 to 24 V
Absolute Maximum Rating Maximum Voltage: 25 V DC
Minimum Voltage: -0.3 V DC
Solid State Switch Closure Input Low: < 10 KΩ; Input High: > 500 KΩ
Internal Weak Pull-Up 100 KΩ
Input Impedance Solid state switch closure: 100 KΩ pull up; Driven signal: 4.5 KΩ
Minimum Pulse Width Contact closure duration: 500 uS; Driven logic signal: 100 uS
Lockout Time 0 to 1 second in 100 ms steps
Edge Detection Falling edge, Schmitt Trigger buffer
Preferred Switch State Normally open or Logic “1” state

Logging

Resolution Pulse: 1 pulse, Runtime: 1 second, State and Event: 1 State or Event
Logging Rate 1 second to 18 hours, 12 minutes, 15 seconds
Time Accuracy ±1 minute per month at 25°C (77°F) (see Plot A in User Manual)
Battery Life 1 year, typical with logging intervals greater than 1 minute and
normally open contacts
Battery Type Two AA alkaline or lithium batteries

Memory

Memory UX120-017: 520,192 measurements (assumes 8-bit)
UX120-017M: 4,124,672 measurements (assumes 8-bit)
Download Type USB 2.0 interface
Download Time 30 seconds for UX120-017, 1.5 minutes for UX120-017M

Physical

Operating Range Logging: -40° to 70°C (-40° to 158°F); 0 to 95% RH (non-condensing)
Launch/Readout: 0° to 50°C (32° to 122°F) per USB specification
Weight 149 g (5.26 oz)
Size 11.4 x 6.3 x 3.3 cm (4.5 x 2.5 x 1.3 inches)
Environmental Rating IP50
CE The CE Marking identifies this product as complying with all relevant
directives in the European Union (EU).

HOBOware Software

HOBOware software is used for launching, reading out, and plotting data from HOBO® data loggers. With HOBOware, you can also check logger status, filter and export data, save changes to graphs in project files, and scale data with the Linear Scaling and Pulse Scaling data assistants. There are two versions of HOBOware: HOBOware and HOBOware Pro.


HOBOware Standard features

  • Simple menus for fast, easy logger setup and readout
  • Point & click for fast setup and readout
  • Scaling to real-world engineering units
  • Presentation-quality graphs
  • Easy export of data files to text or Excel format

FREE DOWNLOAD


Learn more about HOBOware and HOBOware-Pro Features >>


IMPORTANT: This HOBO data logger requires HOBOware software and a communications cable (see related products below)


Limited Stocks Available

A highly versatile, 4-channel energy data logger that combines the functionality of four separate loggers into one compact unit. Enables energy management professionals, from energy auditors to building commissioners, to easily track building energy consumption, equipment runtimes, and water and gas flow rates. This logger has a standard memory capable of 500,000 measurements, and is also available in an expanded memory version, the HOBO UX120-017M, capable of over 4,000,000 measurements.


Features

  • Simultaneously measures and records pulse signals, events, state changes, and runtimes
  • Stores up to over 4 million measurements, enabling longer deployments with fewer site visits
  • Maximum pulse rate – 120 Hz
  • Pulse input range – 0 to 24VDC
  • Streamlines deployment via a range of start/stop options, logger status LEDs, and high-speed USB 2.0 data offload
  • Compatible with HOBOware and HOBOware Pro software for logger setup and graphing & analysis


Important Information

Requires HOBOware software and a USB cable. (Note: A USB cable is included w/HOBOware Pro CD or USB software purchase). See compatible items below.

Customers who bought this item also bought

HOBO UX90 Motor On/Off Logger 128K

The HOBO Motor On/Off data logger records motor on and off conditions within an AC magnetic field with its internal sensor, or mechanical contact closures from external sensing devices. This logger is ideal for tracking the usage & runtimes of motors, pumps, compressors, and other equipment.
$292.00 (ex gst)