HOBO Water Level Data Logger Starter Kit 4 Metre (13’)

Manufacturer:

Combining high accuracy water level measurements with out-of-the-box convenience, this money-saving kit includes everything needed to start logging right away. It is ideal for monitoring water levels and temperatures in wells, streams, lakes and freshwater wetlands.

Part Number: KIT-S-U20-04

Back to Previous Page

Product Files

$1,818.00 ex GST

Qty:

i h

Delivery date: 6 weeks+

Overview
Video Library
Specifications
Software

Monitor Water Levels & Temperatures with Ease

This kit includes:

U20-001-04 HOBO logger (13' range)
BASE-U-4 base station with the required coupler
BHW-PRO-USB HOBOware Pro software.

Like other HOBO Water Level Loggers, the 13-foot version offers exceptional value and ease-of-use, with no cumbersome vent tubes or desiccants to maintain.

Features

Lightning protection; no long signal wires, and electronics are shielded in stainless-steel housing
HOBOware Pro software provides easy conversion to accurate water level reading, fully compensated for barometric pressure, temperature, and water density (use barometric pressure data from nearby weather station)
Multiple-rate sampling allows faster sampling at critical times such as when pumping starts or stops
Available in four depth ranges
Ideal for use in wells, streams, lakes, wetlands and tidal areas
No-vent-tube design for easy reliable deployment
Durable ceramic pressure sensor

HOBO Water Level Data Loggers U20

Learn the features of this water level data logger, including available lengths, barometric pressure data options, and accuracy rating. Housing options are also discussed for fresh and salt water, as well as battery details, optical communications for underwater offloading, and HOBOware Pro software compatibility.

Technical Information
Pressure Sensor
Operation Range	0 to 145 kPa (0 to 21 psia); approximately 0 to 4 m (0 to 13 ft) of water depth at sea level, or 0 to 7 m (0 to 23 ft) of water at 3,000 m (10,000 ft) of altitude
Factory Calibrated Range	69 to 145 kPa (10 to 21 psia), 0° to 40°C (32° to 104°F)
Burst Pressure	310 kPa (45 psia) or 18 m (60 ft) depth
Water Level Accuracy*	Typical error - 0.075% FS, 0.3 cm (0.01 ft) water
Maximum Error	- 0.15% FS, 0.6 cm (0.02 ft) water
Raw Pressure Accuracy**	0.3% FS, 0.43 kPa (0.063 psi) maximum error
Resolution	< 0.014 kPa (0.002 psi), 0.14 cm (0.005 ft) water
Pressure Response Time 90%	< 1 second
Thermal Response Time (90%)	† Approximately 10 minutes in water to achieve full temperature compensation of the pressure sensor
Temperature Sensor
Operation Range	-20° to 50°C (-4° to 122°F)
Accuracy	0.37°C at 20°C (0.67°F at 68°F), see Plot A of User Manual
Resolution	0.1°C at 20°C (0.18°F at 68°F) (10-bit), see Plot A of User Manual
Response Time (9%)	3.5 minutes in water (typical)
Stability (drift)	0.1°C (0.18°F) per year
Logger
Real-time Clock	± 1 minute per month 0° to 50°C (32° to 122°F)
Battery	2/3 AA, 3.6 Volt Lithium, factory-replaceable
Battery Life (typical use)	5 years with 1 minute or greater logging interval
Memory (non-volatile)	64K bytes memory (approx. 21,700 pressure and temperature samples)
Dimensions	2.46 cm (0.97 inches) diameter, 15 cm (5.9 inches) length; mounting hole 6.3 mm (0.25 inches) diameter
Weight	Approximately 210 g (7.4 oz)
Wetted Materials	316 stainless steel, Viton® o-rings, acetyl cap, ceramic sensor
Shock/Drop	Logger is sensitive to shocks. Handle with care and avoid any impact. Always use proper packaging when shipping the logger.
Logging Interval	Fixed-rate or multiple logging intervals, with up to 8 user-defined logging intervals and durations; logging intervals from 1 second to 18 hours. Refer to HOBOware software manual.
Launch Modes	Immediate start and delayed start
Offload Modes	Offload while logging; stop and offload
Battery Indicationj	Battery voltage can be viewed in status screen and optionally logged in datafile. Low battery indication in datafile.
Environmental Rating	IP68
	The CE Marking identifies this product as complying with the relevant directives in the European Union (EU).

* With accurate reference water level measurement and Barometric Compensation Assistant data
** Absolute pressure sensor accuracy includes all pressure drift, temperature, and hysteresis-induced errors
† Maximum error due to rapid thermal changes is approximately 0.5%

HOBOware Software

HOBOware software is used for launching, reading out, and plotting data from HOBO® data loggers. With HOBOware, you can also check logger status, filter and export data, save changes to graphs in project files, and scale data with the Linear Scaling and Pulse Scaling data assistants. There are two versions of HOBOware: HOBOware and HOBOware Pro.

HOBOware Standard features

Simple menus for fast, easy logger setup and readout
Point & click for fast setup and readout
Scaling to real-world engineering units
Presentation-quality graphs
Easy export of data files to text or Excel format

FREE DOWNLOAD

Learn more about HOBOware and HOBOware-Pro Features >>

IMPORTANT: This HOBO data logger requires HOBOware software and a communications cable (see related products below)

Monitor Water Levels & Temperatures with Ease

This kit includes:

U20-001-04 HOBO logger (13' range)
BASE-U-4 base station with the required coupler
BHW-PRO-USB HOBOware Pro software.

Like other HOBO Water Level Loggers, the 13-foot version offers exceptional value and ease-of-use, with no cumbersome vent tubes or desiccants to maintain.

Features

Lightning protection; no long signal wires, and electronics are shielded in stainless-steel housing
HOBOware Pro software provides easy conversion to accurate water level reading, fully compensated for barometric pressure, temperature, and water density (use barometric pressure data from nearby weather station)
Multiple-rate sampling allows faster sampling at critical times such as when pumping starts or stops
Available in four depth ranges
Ideal for use in wells, streams, lakes, wetlands and tidal areas
No-vent-tube design for easy reliable deployment
Durable ceramic pressure sensor

Customers who bought this item also bought

HOBO - Water Level Data Logger Carrying Case

A hard-sided case with foam inserts that holds four HOBO Water Level Loggers and an Optic USB Base Station or Waterproof Shuttle

$132.00 (ex gst)

HOBO - U2X Protective Housing

A protective enclosure for mounting Onset's HOBO U24 conductivity and HOBO U20 water level data loggers.

$126.00 (ex gst)

HOBO Water Level Data Logger Starter Kit 4 Metre (13’)

Monitor Water Levels & Temperatures with Ease

Features

HOBO Water Level Data Loggers U20

Technical Information

Pressure Sensor

Temperature Sensor

Logger

HOBOware Software

HOBOware Standard features

FREE DOWNLOAD

Learn more about HOBOware and HOBOware-Pro Features >>

Monitor Water Levels & Temperatures with Ease

Features

HOBO - Water Level Data Logger Carrying Case

HOBO - U2X Protective Housing

Quality Guaranteed

Safe & Secure Payments

Quality Guaranteed