Search
Menu Close

HOBO® Waterproof Shuttle

Manufacturer:
The HOBO Waterproof Shuttle provides convenient readout and relaunching of underwater and outdoor HOBO loggers with an Optic USB interface, and is waterproof to 20m. The HOBO Waterproof Shuttle can also be used as a base station.
Part Number: U-DTW-1
Back to Previous Page
$683.00 ex GST
i h

Get the most out of your HOBO Logger

Provides convenient readout and relaunching of underwater and outdoor HOBO data loggers with an Optic USB interface, and is waterproof to 20m (66ft). The HOBO Waterproof Shuttle can also be used as a base station.

Couplers are included for compatibility with our U-series loggers with optical communication, including UA Pendants, U20 water level, U22 Water Temp Pro, UTBI TidbiT, U23 Pro Temp/RH, U24 Conductivity, and U26 DO data loggers.


Important Information

HOBOware Pro is required for this product.


Waterproof Shuttle Demo

Watch an Onset technical support specialist demonstrate the use of the HOBO Waterproof Shuttle (U-DTW-1)


Technical Information

Compatibility All HOBO U-Series loggers with optic USB.
Not compatible with the HOBO U-Shuttle (U-DT-1)
Requirements HOBOware Pro 2.2 or greater
Compatible logger and matching coupler For UA Pendant (Part # COUPLER2-A)
For U20 Water Level (Part # COUPLER2-B)
For U22 Water Temp Pro v2 (Part # COUPLER2-C)
For UTBI TidbiT v2 (Part # COUPLER2-D)
For U23 HOBO Pro v2 (Part # COUPLER2-E)
Data capacity 63 logger readouts of up to 64K each
Operating temperature 0° to 50°C (32° to 122°F)
Storage temperature -20° to 50°C (-4° to 122°F)
Wetted materials Polycarbonate case, EPDM o-rings and retaining loop
Waterproof to 20 m (66 feet)
Time Accuracy ± 1 minute per month at 25°C (77°F)
Logger-to-shuttle transfer speed Reads out one full 64K logger in about 30 seconds
Shuttle-to-host Transfer Speed Full shuttle offload (4 MB) to host computer in 10 to 20 minutes, depending on computer
Batteries 2 AA alkaline batteries required for remote operation
Battery Life One year or at least 50 complete memory fills, typical use
Weight 150 g (4 oz)
Dimensions 15.2 x 4.8 cm (6.0 x 1.9 inches)

The CE Marking identifies this product as complying with the relevant directives in the European Union (EU).

Get the most out of your HOBO Logger

Provides convenient readout and relaunching of underwater and outdoor HOBO data loggers with an Optic USB interface, and is waterproof to 20m (66ft). The HOBO Waterproof Shuttle can also be used as a base station.

Couplers are included for compatibility with our U-series loggers with optical communication, including UA Pendants, U20 water level, U22 Water Temp Pro, UTBI TidbiT, U23 Pro Temp/RH, U24 Conductivity, and U26 DO data loggers.


Important Information

HOBOware Pro is required for this product.


Customers who bought this item also bought

HOBO U20L - Low Cost Water Level Data Logger

The HOBO U20L Series is the industry’s lowest-cost family of loggers for monitoring water level and temperature in both fresh and saltwater, in depths up to 30 Meters.
from $853.00 (ex gst)

HOBO - Water Temperature Pro v2 Data Logger

The durable HOBO Water Temp Pro v2 has 12-bit resolution and a precision sensor for ±0.2°C accuracy over a wide temperature range. Designed with a durable streamlined case for extended deployment in fresh or salt water.
$368.00 (ex gst)

HOBO U24 - Conductivity/Salinity (Salt Water) Data Logger

The HOBO U24-002-C is a cost-effective data logger for measuring salinity, conductivity and temperature in saltwater environments with relatively small changes in salinity (±5,000 μS/cm) such as saltwater bays, or to detect salinity events such as upwelling, rainstorm, and discharge events.
$2,241.00 (ex gst)