Personal menu

Intech XU2HN - Head Mount Transmitter - RTD Input, 4-20mA Output

Manufacturer:

Suitable for head mounting on RTD Temperature Sensors to convert the signal to 4-20mA (Loop Powered)

Part Number: XU2HN

Have OneTemp pre-set the range for you at no charge *

Back to Previous Page

Product Files

$127.00 ex GST

Qty:

i h

Overview
Video Library
Specifications

Features:

Programmable via USB (requires the XU-USB programming key).
No power supply or calibration required during programming.
Temperature Input Types:
- RTD Pt100 and Pt1000.
- Output is Linear with Temperature.
High Accuracy 0.1%.
Compact Industrial Head Mount Enclosure.
Reverse Polarity Protection.
Easy to Install.
Low Cost.

USB Programmable RTD Temperature Input.
Standard = RTD Pt100, 0~100°C Input; Upscale; 4~20mA Output (Loop Powered).
Non-Isolating.
Case Temperature range -20°C to +55°C.

USB Programming Key
Note: the same XU-USB can be used to program any of the XU Series Transmitters - just change the included cable type for DIN or In-Head!

Note: Requires the XU-USB programming key.
Download the Free Programming Software

Intech Instruments XU process transmitters

Process transmitter which can be programmed using a software program and special usb cable. The transmitter does not need to be powered or require any calibration after completion

Output 2 wire 4~20mA / or 20~4mA - Loop Powered.
Power Supply 9.5~36Vdc.
Supply Voltage Sensitivity <±0.005%/V FSO.
Output Load Resistance 700Ω @ 24Vdc. (50Ω/V Above 9.5Vdc.)
Maximum Output Current Limited to <28mA.
EMC Emissions Compliance EN 61326
EMC Immunity Compliance EN 61326
Safety Compliance EN 61010-1
Accurate to <±0.03% FSO Typical.
Linearity & Repeatability <±0.02% FSO Typical. (Unless Individual Specifications State Otherwise)
Ambient Drift <±0.003%/C FSO Typical.
Noise Immunity 125dB CMRR Average. (2.0k Vdc Limit.)
R.F. Immunity <1% Effect FSO Typical.
Signal Isolation Voltage Between Input and Output 3750Vac for 1 min. (Excluding XU2HN)
Response Time 400msec Typical. (From 10 to 90% 300msec Typical.)
Sensor Fail Low 3.8mA, High 21mA
Startup Time 3 seconds, 3.7mA output
Output calibrate via Pot ±0.5mA Zero offset adjust. (Excluding XU2HN)
Operating Temperature -20~85°C (XU2HN: -20~55°C)
Storage Temperature -20~100°C
Operating Humidity 5~85%RH Max. Non-Condensing.
Mounting 35mm Symmetrical Mounting Rail. In Head mount for XU2HI & XU2HN
Dimensions XU2: H=79, W=20, D=68mm. / XU2HI & XU2HN: H=44, W=44, D=23mm.

Features:

Programmable via USB (requires the XU-USB programming key).
No power supply or calibration required during programming.
Temperature Input Types:
- RTD Pt100 and Pt1000.
- Output is Linear with Temperature.
High Accuracy 0.1%.
Compact Industrial Head Mount Enclosure.
Reverse Polarity Protection.
Easy to Install.
Low Cost.

USB Programmable RTD Temperature Input.
Standard = RTD Pt100, 0~100°C Input; Upscale; 4~20mA Output (Loop Powered).
Non-Isolating.
Case Temperature range -20°C to +55°C.

USB Programming Key
Note: the same XU-USB can be used to program any of the XU Series Transmitters - just change the included cable type for DIN or In-Head!

Note: Requires the XU-USB programming key.
Download the Free Programming Software

Customers who bought this item also bought

OneTemp PT100 RTD Temperature Sensor

PT100 RTD Temperature sensor with stainless steel sheath and PVC or Teflon lead.

$58.00 (ex gst)

OneTemp PT100 RTD with Aluminium Connection Head

PT100, RTD temperature sensor with 6.4mm (1/4") stem diameter and a variety of lengths are stocked. This sensor has a IP65 aluminium connection head with a high temperature ceramic connection block or Transmitter. Ideal for general purpose applications up to 260C.

$109.00 (ex gst)

OneTemp PT100 RTD with 1/2"BSP Connection and Aluminium Head

A PT100, RTD temperature sensor with 6.4mm (1/4") stem diameter, 1/2"BSP process connection and a variety of lengths are stocked. This sensor has a IP65 aluminium connection head with a high temperature ceramic connection block or Transmitter. Ideal for general purpose process applications up to 260°C.

$143.00 (ex gst)

Intech XU2HN - Head Mount Transmitter - RTD Input, 4-20mA Output

Features:

Intech Instruments XU process transmitters

Features:

OneTemp PT100 RTD Temperature Sensor

OneTemp PT100 RTD with Aluminium Connection Head

OneTemp PT100 RTD with 1/2"BSP Connection and Aluminium Head

Quality Guaranteed

Safe & Secure Payments

Quality Guaranteed

Intech XU2HN - Head Mount Transmitter - RTD Input, 4-20mA Output

Features:

Intech Instruments XU process transmitters

Features:

Intech Programming Kit for XU Series Transmitters - XU-USB

OneTemp PT100 RTD Temperature Sensor

OneTemp PT100 RTD with Aluminium Connection Head

OneTemp PT100 RTD with 1/2"BSP Connection and Aluminium Head

Quality Guaranteed

Safe & Secure Payments

Quality Guaranteed