Holiday Closure: We will be closed from Mon, 23rd Dec & will return on Thurs, 2nd Jan 2025

Holiday Closure: We will be closed from Mon, 23rd Dec & will return on Thurs, 2nd Jan 2025

Search
Menu Close

Jumo flowTRANS MAG I01 - Flow Transmitter

Manufacturer:
The transmitter can be used in liquids with a conductivity as of 20 μS/cm.
Part Number: PN 406010
Back to Previous Page
Call for pricing

Plug-in magnetic-inductive flow transmitter


The transmitter can be used in liquids with a conductivity as of 20 μS/cm. Standardized fittings ensure simple insertion of the transmitter into pipes from DN 15 to DN 400. The output signal is 4 to 20 mA and the pulse frequency signal is 0 to 240 Hz.


Key Features

  • The flow rate transmitter has a magnetically inductive sensor (MID).
  • Standardized fittings ensure easy installation of the transmitter into tubes ranging from DN15 to DN400 (see Data Sheet 406090).
  • The transmitter can be used in liquids with a conductivity of 20 μS/cm or greater. Flow speeds from 0.2 to 10 m/s can be measured.
  • The transmitter provides an output signal of 4 to 20 mA.
  • The measurement is also represented as a frequency pulse signal of 0 to 240 Hz.
  • Simple control tasks can be implemented with the installed relay.
  • Stainless steel design.
  • Simple mounting.
  • For pressures up to PN16 and temperatures up to 150°C.

General Specifications



For further details, please refer to the downloadable documents above

Plug-in magnetic-inductive flow transmitter


The transmitter can be used in liquids with a conductivity as of 20 μS/cm. Standardized fittings ensure simple insertion of the transmitter into pipes from DN 15 to DN 400. The output signal is 4 to 20 mA and the pulse frequency signal is 0 to 240 Hz.


Key Features

  • The flow rate transmitter has a magnetically inductive sensor (MID).
  • Standardized fittings ensure easy installation of the transmitter into tubes ranging from DN15 to DN400 (see Data Sheet 406090).
  • The transmitter can be used in liquids with a conductivity of 20 μS/cm or greater. Flow speeds from 0.2 to 10 m/s can be measured.
  • The transmitter provides an output signal of 4 to 20 mA.
  • The measurement is also represented as a frequency pulse signal of 0 to 240 Hz.
  • Simple control tasks can be implemented with the installed relay.
  • Stainless steel design.
  • Simple mounting.
  • For pressures up to PN16 and temperatures up to 150°C.