Jumo tecLine Ci-S - Inductive conductivity and temperature sensor for general process 202942

Description

The sensor detects the electrolytic conductivity of a process liquid. The sensor uses the inductive principle of measurement. An integrated (Pt1000) temperature sensor measures the process temperature at the same time. The sensors in this data sheet add some generally established variants in different engineering versions to the wide range of JUMO inductive conductivity sensors. The variants are made from different materials (PVDF or PEEK) and have different sensor geometries. PEEK sensors with process connections /955 and /956 are installed in the process via process adapters (e.g. clamp, SMS, milk cone) using a sealing cone system. The extremely small design also allows them to be used in small cross-section pipes. The PVDF variants have a larger sensor body and a choice of an exposed temperature sensor (in a stainless steel pocket) or an internal temperature sensor. The PVDF versions are used when it is not possible to use other measuring cell materials for chemical reasons. All the sensors are made from hygienically safe materials and have proved to be reliable in typical food and beverage industry cleaning processes (e.g. CIP). A wide range of process connections are available to ensure flexibility in systems and to provide spare equipment for older instruments There is an immersion variant that can be used in open tanks and channels. Because it measures inductively, the sensor is practically maintenance-free, compared with the conductive method; deposits and grease or oil film on the surface of the sensor have virtually no effect on measuring accuracy. JUMO tecLine Ci-S sensors are designed for connection to the JUMO AQUIS 500 Ci transmitter, as per data sheet 202566.

Features

• Different mounting dimensions allow for a wide range of applications
• Materials are FDA/food-use approved
• Numerous process connection variants
• Fast-response temperature sensor
• Different body materials depending on the requirement
• Combinable with JUMO AQUIS 500 Ci

Applications

• Liquid food
• CIP/SIP systems
• Concentration measurements (adding concentrate) of acids, lyes and cleaning chemicals
• Other rinsing and cleaning processes