Holiday Closure: We will be closed from Mon, 23rd Dec & will return on Thurs, 2nd Jan 2025

Holiday Closure: We will be closed from Mon, 23rd Dec & will return on Thurs, 2nd Jan 2025

Menu
Search
Search Our Catalogue Close
Shopping cart Close
Menu Close
All Categories

    Monnit Enterprise Motion Detection Wireless Sensor

    Manufacturer:
    Monitor movement by people or animals in virtually any area or facility within a range of up to 15 feet
    Part Number: MNS2-4-W2-MS-IR
    Back to Previous Page
    Product Files
    $335.00 ex GST
    i h

    Manage access across your facilities and get instant mobile alerts.

    Monitor movement by people or animals in virtually any area or facility. Our passive infrared (PIR) Motion Detection Sensors help you increase security, coordinate building occupancy services and space booking, and safeguard critical assets and equipment by recording heat signals.

    Monnit’s wireless Motion Detection Sensors can be used in any facility from office buildings to farms to data centers. The Standard Motion Detection Sensor delivers up to 80 degrees of sensing coverage. Get an alert on your mobile device via text, email, or call if people or animals move within a range of up to 15 feet.


    Sense whats coming and going

    The Wireless Motion Detection Sensor detects motion and movement using a passive infrared (PIR) motion sensing element. The element detects relative changes in temperature caused by warm bodies moving through the viewing area. Once the sensor detects movement it communicates with the iMonnit Online Sensor Monitoring and Notification System via an Alta gateway. iMonnit stores all data in the online system where the data can be reviewed and exported as a data sheet or graph. Notifications can be set up through the online system to alert the user when motion has been detected.

    This sensor come standard with two replaceable AA batteries. The typical battery life is approximately 10 years.


    Features

    • Impressive wireless range of up to 1,200 feet through walls
    • Frequency-hopping spread spectrum (FHSS)
    • Improved interference immunity
    • Improved power management for longer battery life
    • Encrypt-RF® Security (Diffie-Hellman Key Exchange + AES-128 CBC for sensor data messages)
    • Stores 2000 to 4000 readings if gateway connection is lost (non-volatile flash, persists through the power cycle)
      • 10-minute heartbeats = ~ 22 days
      • 2-hour heartbeats = ~ 266 days
    • Over-the-air updates
      • Free iMonnit basic online wireless sensor monitoring and notification system to configure sensors, view data and set alerts via SMS text and email


      Applications

      • Area access monitoring
      • Restricted area monitoring
      • Room occupancy monitoring
      • Vacant property monitoring


      IMPORTANT - Sensor Operation

      Please note: this sensor requires both an applicable Gateway and iMonnit software to operate. For further information, please refer to the tabs above or related products below.


      Monnit Gateway Options

      An integral component of any IoT network is the gateway. A gateway device allows for data from sensors to be transmitted to the iMonnit software platform.


      Monnit Ethernet Wireless Gateway 4

      Monnit’s Ethernet Gateways allow your Monnit Wireless Sensors to communicate with the iMonnit™ Online Wireless Sensor Monitoring and Notification System without the need for a PC. Simply provide power and plug the gateway into an open Ethernet network port with an internet connection. It will then automatically connect with our online servers, providing the perfect solution for commercial locations where there is an active internet connection.

      Learn more about the Ethernet Wireless Gateway 4>>



      Monnit 4G + Ethernet IoT Gateway

      The ALTA® by Monnit Wireless IoT Gateway combines a 4G LTE CAT-M1/NB2 cellular engine and Ethernet platform with Monnit’s wireless access point network to aggregate and communicate data from Monnit ALTA Wireless Sensors. The ALTA IoT Gateway allows ALTA Sensors to operate on the world’s leading cellular networks and stay connected to the Internet. The gateway uses AC main power but also has redundant power through a battery backup lasting up to 60 hours.

      To meet the global demand for enterprise IoT deployment, the IoT Gateway communicates with the cloud-based iMonnit® monitoring software via cellular transmission, making it ideal for remote locations or where the Internet isn’t available. The RJ-45 Ethernet jack allows local device configuration, diagnostics, and connectivity backup. The IoT Gateway is instrumental in sending sensor notifications via text, email, or call if user-defined conditions are met or exceeded.

      Learn more about the 4G + Ethernet Wireless Gateway 4>>


      Online Sensor Monitoring Software

      iMonnit is a cloud based mobile internet platform and central hub for managing Monnit and ALTA products. All data is secured on dedicated servers operating Microsoft SQL Server. This online user interface is where all your device settings can be arranged, supervised, and modified to reflect your unique environment. OneTemp will look after the activation and setup of your new online iMonnit account free of charge. There is also a free mobile app for you to stay in control at all times. Start with the basic version or upgrade to iMonnit Premiere to enjoy the full features your Monnit experience can offer.


      iMonnit Basic Vs Premiere:

      • Basic - Free with no ongoing costs
        Monnit Basic is included for free with all wireless sensors, providing basic features for you to configure and monitor your sensors online. These basic features only support one network and one registered user on an account.
      • Premiere - Minimal Annual Fee
        iMonnit Premiere allows for enhanced functionality of your wireless sensors and includes an advanced software feature set at a low annual cost. All of iMonnit's advanced features are availble for configuration. You can have more sensors on your account, support multiple users, and view floorplans for all your sensors.

      Learn more about the iMonnit Premier Online Software>>

       


      Technical Information
      Supply voltage 2.0-3.8 VDC (3.0-3.8 VDC using power supply) *
      Current consumption 1.0 μA (Sleep)
      570 μA (MCU idle)
      2.5 mA (MCU active)
      5.5 mA (radio RX mode)
      22.6 mA (radio TX mode)
      Operating temperature range (board cicuitry and batteries) -18°C to 55°C (0°F to 130°F) using alkaline
      -40°C to 85°C (-40°F to 185°F) using lithium **
      Optimal battery temperature range (AA) +10°C to +50°C (+50°F to +122°F)
      Datalogging Datalogs 2000 to 4000 readings if gateway connection
      is lost (non-volatile flash, persists through the power
      cycle):
      - 10-minute heartbeats = ~ 22 days
      - 2-hour heartbeats = ~ 266 days
      Wireless range 1,200+ ft non-line-of-sight
      Security Encrypt-RF® (256-bit key exchange and AES-128 CTR)
      Weight 2.9 ounces (82.2 g)
      Certifications 900 MHz product; FCC ID: ZTL-G2SC1 and IC:
      9794A-G2SC1.
      868 and 433 MHz product tested and found to comply
      with: EN 300 220-2 V3.1.1 (2017-02), EN 300 220-2
      V3.1.1 (2017-02) and EN 60950

      * Hardware cannot withstand negative voltage. Please take care when connecting a power device.

      Manage access across your facilities and get instant mobile alerts.

      Monitor movement by people or animals in virtually any area or facility. Our passive infrared (PIR) Motion Detection Sensors help you increase security, coordinate building occupancy services and space booking, and safeguard critical assets and equipment by recording heat signals.

      Monnit’s wireless Motion Detection Sensors can be used in any facility from office buildings to farms to data centers. The Standard Motion Detection Sensor delivers up to 80 degrees of sensing coverage. Get an alert on your mobile device via text, email, or call if people or animals move within a range of up to 15 feet.


      Sense whats coming and going

      The Wireless Motion Detection Sensor detects motion and movement using a passive infrared (PIR) motion sensing element. The element detects relative changes in temperature caused by warm bodies moving through the viewing area. Once the sensor detects movement it communicates with the iMonnit Online Sensor Monitoring and Notification System via an Alta gateway. iMonnit stores all data in the online system where the data can be reviewed and exported as a data sheet or graph. Notifications can be set up through the online system to alert the user when motion has been detected.

      This sensor come standard with two replaceable AA batteries. The typical battery life is approximately 10 years.


      Features

      • Impressive wireless range of up to 1,200 feet through walls
      • Frequency-hopping spread spectrum (FHSS)
      • Improved interference immunity
      • Improved power management for longer battery life
      • Encrypt-RF® Security (Diffie-Hellman Key Exchange + AES-128 CBC for sensor data messages)
      • Stores 2000 to 4000 readings if gateway connection is lost (non-volatile flash, persists through the power cycle)
        • 10-minute heartbeats = ~ 22 days
        • 2-hour heartbeats = ~ 266 days
      • Over-the-air updates
        • Free iMonnit basic online wireless sensor monitoring and notification system to configure sensors, view data and set alerts via SMS text and email


        Applications

        • Area access monitoring
        • Restricted area monitoring
        • Room occupancy monitoring
        • Vacant property monitoring


        IMPORTANT - Sensor Operation

        Please note: this sensor requires both an applicable Gateway and iMonnit software to operate. For further information, please refer to the tabs above or related products below.


        Related products
        Picture of iMonnit Cloud Sensor Management Software

        iMonnit Cloud Sensor Management Software

        iMonnit Basic & Premiere Wireless Web Based Sensor Monitoring and Notification Systems.
        $0.00 (ex gst)
        Picture of Monnit Enterprise Motion, Humidity & Temp Wireless Sensor

        Monnit Enterprise Motion, Humidity & Temp Wireless Sensor

        A three-in-one Wireless Motion+ Sensor combines the power of monitoring people’s movement, ambient temperature, and relative humidity
        from $519.00 (ex gst)
        Picture of Monnit IoT Gateway (4G)

        Monnit IoT Gateway (4G)

        The ALTA® by Monnit Wireless IoT Gateway combines a 4G LTE CAT-M1/NB2 cellular engine and Ethernet platform (commercial only) with Monnit’s wireless access point network to aggregate and communicate data from Monnit ALTA Wireless Sensors.
        $958.00 (ex gst)
        Picture of Monnit Ethernet Gateway

        Monnit Ethernet Gateway

        The MonnitLink Ethernet gateway allows your Monnit Wireless Sensors to communicate with the iMonnit™ Online Wireless Sensor Monitoring and Notification System without the need for a PC
        $613.00 (ex gst)

        Quality Guaranteed

        Information
        My account
        Customer service

        Safe & Secure Payments

        Quality Guaranteed

        Copyright © 2024 Onetemp. All rights reserved.