Holiday Closure: We will be closed from Mon, 23rd Dec & will return on Thurs, 2nd Jan 2025

Holiday Closure: We will be closed from Mon, 23rd Dec & will return on Thurs, 2nd Jan 2025

Menu
Search
Search Our Catalogue Close
Shopping cart Close
Menu Close
All Categories

    Monnit Enterprise Open-Closed Wireless Sensor

    Manufacturer:
    The Monnit Enterprise Open-Closed wireless sensor helps you remotely monitor the open-closed status of any door, window, cabinet or lid.
    Part Number: MNS2-4-W2-OC-ST
    Back to Previous Page
    Product Files
    $310.00 ex GST
    i h

    Always know the status of your doors, windows and cabinets 


    The Monnit Enterprise Open-Closed Sensor is ideal for any situation when it is important to know the open/closed status of any door, window or cabinet.

    This sensor uses an external switch and trigger magnet to detect status—when the magnets meet, a door or window is closed. When the sensor detects that the magnet is removed or returned it sends the information to the iMonnit Online Sensor Monitoring and Notification Systems. The data is then stored in the online system and can be reviewed and exported as a data sheet or graph.

    The sensor can be configured via iMonnit online to send notifications during specific dayparts, such as after-hours, or when a magnetic source is present or not, i.e. door is open or closed. This data sheds light on access patterns—a boon for the foodservice, healthcare, and hospitality sectors.

    The open-closed sensor comes standard with two replaceable 1.5V AA batteries. The typical battery life is approximately 10 years.


    Features

    • Impressive wireless range of up to 1,200 feet through walls
    • Frequency-hopping spread spectrum (FHSS)
    • Improved interference immunity
    • Improved power management for longer battery life
    • Encrypt-RF® Security (Diffie-Hellman Key Exchange + AES-128 CBC for sensor data messages)
    • Stores 2000 to 4000 readings if gateway connection is lost (non-volatile flash, persists through the power cycle)
      • 10-minute heartbeats = ~ 22 days
      • 2-hour heartbeats = ~ 266 days
    • Over-the-air updates
    • Free iMonnit basic online wireless sensor monitoring and notification system to configure sensors, view data and set alerts via SMS text and email


    Applications

    • Commercial Property doors and window access
    • IT server rooms and closets
    • Freezer and cooler doors
    • Restricted area monitoring
    • Crawl space monitoring


    IMPORTANT - Sensor Operation

    Please note: this sensor requires both an applicable Gateway and iMonnit software to operate. For further information, please refer to the tabs above or related products below.

    Monnit Gateway Options

    An integral component of any IoT network is the gateway. A gateway device allows for data from sensors to be transmitted to the iMonnit software platform.


    Monnit Ethernet Wireless Gateway 4

    Monnit’s Ethernet Gateways allow your Monnit Wireless Sensors to communicate with the iMonnit™ Online Wireless Sensor Monitoring and Notification System without the need for a PC. Simply provide power and plug the gateway into an open Ethernet network port with an internet connection. It will then automatically connect with our online servers, providing the perfect solution for commercial locations where there is an active internet connection.

    Learn more about the Ethernet Wireless Gateway 4>>



    Monnit 4G + Ethernet IoT Gateway

    The ALTA® by Monnit Wireless IoT Gateway combines a 4G LTE CAT-M1/NB2 cellular engine and Ethernet platform with Monnit’s wireless access point network to aggregate and communicate data from Monnit ALTA Wireless Sensors. The ALTA IoT Gateway allows ALTA Sensors to operate on the world’s leading cellular networks and stay connected to the Internet. The gateway uses AC main power but also has redundant power through a battery backup lasting up to 60 hours.

    To meet the global demand for enterprise IoT deployment, the IoT Gateway communicates with the cloud-based iMonnit® monitoring software via cellular transmission, making it ideal for remote locations or where the Internet isn’t available. The RJ-45 Ethernet jack allows local device configuration, diagnostics, and connectivity backup. The IoT Gateway is instrumental in sending sensor notifications via text, email, or call if user-defined conditions are met or exceeded.

    Learn more about the 4G + Ethernet Wireless Gateway 4>>


    Online Sensor Monitoring Software

    iMonnit is a cloud based mobile internet platform and central hub for managing Monnit and ALTA products. All data is secured on dedicated servers operating Microsoft SQL Server. This online user interface is where all your device settings can be arranged, supervised, and modified to reflect your unique environment. OneTemp will look after the activation and setup of your new online iMonnit account free of charge. There is also a free mobile app for you to stay in control at all times. Start with the basic version or upgrade to iMonnit Premiere to enjoy the full features your Monnit experience can offer.


    iMonnit Basic Vs Premiere:

    • Basic - Free with no ongoing costs
      Monnit Basic is included for free with all wireless sensors, providing basic features for you to configure and monitor your sensors online. These basic features only support one network and one registered user on an account.
    • Premiere - Minimal Annual Fee
      iMonnit Premiere allows for enhanced functionality of your wireless sensors and includes an advanced software feature set at a low annual cost. All of iMonnit's advanced features are availble for configuration. You can have more sensors on your account, support multiple users, and view floorplans for all your sensors.

    Learn more about the iMonnit Premier Online Software>>

     


    Technical Information
    Supply voltage 2.0-3.8 VDC
    Current consumption 0.2 µA (sleep mode), 0.7 µA (RTC sleep), 570 µA (MCU idle), 2.5
    mA (MCU active), 5.5 mA (radio RX mode), 22.6 mA (radio TX
    mode)
    Operating temperature range (board circuitry and battery) -40°C to +85°C (-40°F to +185°F)
    Included battery Max temperature range -40° to +85°C (-40° to +185°F) 
    Capacity 1500 mAh
    Optional solar feature Solar panel 5VDC/30mA (53mm x 30mm)
    Charging temperature range 0° to 45°C (32° to 113°F)
    Max temperature range -20° to 60°C (-4° to 140°F)
    Included rechargeable battery 600 mAh/>2000 charge cycles (80% of initial capacity)
    Solar efficiency Optimized for high and low-light operation 1
    Charging efficiency 40% 2
    Luminous sustainability Minimum of 250 LUX 2
    Magnetic Switch  SPST, gold under -plating with Deactivated Rhodium outer-plating
    (capable of 50 million activations)
    Operation Gap Up to 3/4 inch
    Wire Leads  22 gauge/15 inch length
    Magnet Alnico magnet/Weatherproof, high-impact ABS plastic covering
    with self-adhesive backing
    Magnet Dimensions See Diagram on page 5
    Magnet temperature range -15°F to 160°F (-25°C to 70°C)
    Integrated memory  Up to 512 sensor messages
    Wireless range 1,200+ ft non-line-of-sight
    Security Encrypt-RF® (256-bit key exchange and AES-128 CTR)
    Weight 4.7 ounces
    Enclosure rating  NEMA 1, 2, 4, 4x, 12 and 13 rated, sealed and weather proof
    UL rating  UL Listed to UL508-4x specifications (File E194432)
    Certifications 900 MHz product; FCC ID: ZTL-G2SC1 and IC: 9794A-G2SC1.
    868 and 433 MHz product tested and found to comply with: EN
    300 220-2 V3.1.1 (2017-02), EN 300 220-2 V3.1.1 (2017-02) and
    EN 60950

    1 Light present 25% of day yields 125% of operating power to support 10-minute heartbeats.
    2 Solar feature?s energy harvesting circuitry works indoors with low light.

    Always know the status of your doors, windows and cabinets 


    The Monnit Enterprise Open-Closed Sensor is ideal for any situation when it is important to know the open/closed status of any door, window or cabinet.

    This sensor uses an external switch and trigger magnet to detect status—when the magnets meet, a door or window is closed. When the sensor detects that the magnet is removed or returned it sends the information to the iMonnit Online Sensor Monitoring and Notification Systems. The data is then stored in the online system and can be reviewed and exported as a data sheet or graph.

    The sensor can be configured via iMonnit online to send notifications during specific dayparts, such as after-hours, or when a magnetic source is present or not, i.e. door is open or closed. This data sheds light on access patterns—a boon for the foodservice, healthcare, and hospitality sectors.

    The open-closed sensor comes standard with two replaceable 1.5V AA batteries. The typical battery life is approximately 10 years.


    Features

    • Impressive wireless range of up to 1,200 feet through walls
    • Frequency-hopping spread spectrum (FHSS)
    • Improved interference immunity
    • Improved power management for longer battery life
    • Encrypt-RF® Security (Diffie-Hellman Key Exchange + AES-128 CBC for sensor data messages)
    • Stores 2000 to 4000 readings if gateway connection is lost (non-volatile flash, persists through the power cycle)
      • 10-minute heartbeats = ~ 22 days
      • 2-hour heartbeats = ~ 266 days
    • Over-the-air updates
    • Free iMonnit basic online wireless sensor monitoring and notification system to configure sensors, view data and set alerts via SMS text and email


    Applications

    • Commercial Property doors and window access
    • IT server rooms and closets
    • Freezer and cooler doors
    • Restricted area monitoring
    • Crawl space monitoring


    IMPORTANT - Sensor Operation

    Please note: this sensor requires both an applicable Gateway and iMonnit software to operate. For further information, please refer to the tabs above or related products below.

    Related products
    Picture of iMonnit Cloud Sensor Management Software

    iMonnit Cloud Sensor Management Software

    iMonnit Basic & Premiere Wireless Web Based Sensor Monitoring and Notification Systems.
    $0.00 (ex gst)
    Picture of Monnit IoT Gateway (4G)

    Monnit IoT Gateway (4G)

    The ALTA® by Monnit Wireless IoT Gateway combines a 4G LTE CAT-M1/NB2 cellular engine and Ethernet platform (commercial only) with Monnit’s wireless access point network to aggregate and communicate data from Monnit ALTA Wireless Sensors.
    $958.00 (ex gst)
    Picture of Monnit Ethernet Gateway

    Monnit Ethernet Gateway

    The MonnitLink Ethernet gateway allows your Monnit Wireless Sensors to communicate with the iMonnit™ Online Wireless Sensor Monitoring and Notification System without the need for a PC
    $613.00 (ex gst)
    Monnit Industrial Open-Closed Wireless Sensor

    Monnit Industrial Open-Closed Wireless Sensor

    The Monnit Industrial Open-Closed Wireless Sensor will record the open-closed status of any window, door, or cabinet.
    $494.00 (ex gst)
    Customers who bought this item also bought
    Picture of Monnit Enterprise Standard Temperature Wireless Sensor

    Monnit Enterprise Standard Temperature Wireless Sensor

    Accurately measures temperatures between -40 to +125°C in ambient conditions or with an external probe.
    from $285.00 (ex gst)
    Picture of Monnit Enterprise AC Current Meter Wireless Sensor

    Monnit Enterprise AC Current Meter Wireless Sensor

    These sensors track the minimum, maximum, and average RMS current, as well as amp hours. If power consumption spikes or plummets beyond user-defined limits, an alert is sent via text, email, or call.
    from $434.00 (ex gst)

    Quality Guaranteed

    Information
    My account
    Customer service

    Safe & Secure Payments

    Quality Guaranteed

    Copyright © 2024 Onetemp. All rights reserved.