Holiday Closure: We will be closed from Mon, 23rd Dec & will return on Thurs, 2nd Jan 2025

Holiday Closure: We will be closed from Mon, 23rd Dec & will return on Thurs, 2nd Jan 2025

Menu
Search
Search Our Catalogue Close
Shopping cart Close
Menu Close
All Categories

    Monnit Industrial Water Rope Wireless Sensor

    Manufacturer:
    When liquid contacts the sensor’s conductive polymer rope, the sensor instantly activates its onboard RF radio and transmits water presence data to the iMonnit Sensor Configuration and Management software and facilitates a near-instantaneous text, call, or email alert.
    Part Number: MNS2-4-IN-WS-WR
    Back to Previous Page
    Product Files
    $804.00 ex GST
    i h

    Water detection sensor for industrial applications

    Data loss, irreparable damage, lost revenue—all could have been avoided through the early detection with a Monnit Industrial Water Rope Sensor.

    When liquid contacts the sensor’s conductive polymer rope, the sensor instantly activates its onboard RF radio and transmits water presence data to the iMonnit Sensor Configuration and Management software and facilitates a near-instantaneous text, call, or email alert.

    The Water Rope Sensor detects conductive liquids anywhere along the length of the detection rope by using two wires covered with conducting polymer. When water or conductive liquid contacts the rope, the sensor will immediately turn on the RF radio. Then, the sensor transmits the data to the wireless gateway and the iMonnit Online Sensor Monitoring and Notification System, allowing you to immediately receive an alert by SMS text, email, or voice call. The sensor rope quickly dries so it can reset.


    More ways to monitor for leaks and spills

    The sensor comes with an industrial battery included with the life of up to 7 years. This water detection sensor comes with 10 feet of a sensing lead or detection rope. Additional 10-ft sections are available and can be connected up to 100 feet.

    All industrial sensors are enclosed in a reliable, weatherproof NEMA-rated enclosure that are constructed for both indoor and outdoor use. These rugged enclosures protect the sensor circuitry against;

    • Falling dirt
    • Wind-blown dust
    • Rain, sleet, snow, splashing water, and hose-directed water
    • Ice formation on the enclosure
    • Increased resistance to corrosion


    Features

    • Impressive wireless range of up to 1,200 feet through walls
    • Frequency-hopping spread spectrum (FHSS)
    • Improved interference immunity
    • Improved power management for longer battery life
    • Encrypt-RF® Security (Diffie-Hellman Key Exchange + AES-128 CBC for sensor data messages)
    • Stores 2000 to 4000 readings if gateway connection is lost (non-volatile flash, persists through the power cycle)
      • 10-minute heartbeats = ~ 22 days
      • 2-hour heartbeats = ~ 266 days
    • Over-the-air updates
    • Free iMonnit basic online wireless sensor monitoring and notification system to configure sensors, view data and set alerts via SMS text and email


    Applications

    • Frozen or Burst Pipe Monitoring
    • Reservoir Level Monitoring
    • Storage Unit Monitoring
    • Water Intrusion Monitoring
    • Freezers and coolers
    • Document retention center monitoring
    • Basement water monitoring
    • HVAC system operation and testing
    • Environmental monitoring
    • Boat bilge monitoring


    IMPORTANT - Sensor Operation

    Please note: this sensor requires both an applicable Gateway and iMonnit software to operate. For further information, please refer to the tabs above or related products below.


    Monnit Gateway Options

    An integral component of any IoT network is the gateway. A gateway device allows for data from sensors to be transmitted to the iMonnit software platform.


    Monnit Ethernet Wireless Gateway 4

    Monnit’s Ethernet Gateways allow your Monnit Wireless Sensors to communicate with the iMonnit™ Online Wireless Sensor Monitoring and Notification System without the need for a PC. Simply provide power and plug the gateway into an open Ethernet network port with an internet connection. It will then automatically connect with our online servers, providing the perfect solution for commercial locations where there is an active internet connection.

    Learn more about the Ethernet Wireless Gateway 4>>



    Monnit 4G + Ethernet IoT Gateway

    The ALTA® by Monnit Wireless IoT Gateway combines a 4G LTE CAT-M1/NB2 cellular engine and Ethernet platform with Monnit’s wireless access point network to aggregate and communicate data from Monnit ALTA Wireless Sensors. The ALTA IoT Gateway allows ALTA Sensors to operate on the world’s leading cellular networks and stay connected to the Internet. The gateway uses AC main power but also has redundant power through a battery backup lasting up to 60 hours.

    To meet the global demand for enterprise IoT deployment, the IoT Gateway communicates with the cloud-based iMonnit® monitoring software via cellular transmission, making it ideal for remote locations or where the Internet isn’t available. The RJ-45 Ethernet jack allows local device configuration, diagnostics, and connectivity backup. The IoT Gateway is instrumental in sending sensor notifications via text, email, or call if user-defined conditions are met or exceeded.

    Learn more about the 4G + Ethernet Wireless Gateway 4>>


    Online Sensor Monitoring Software

    iMonnit is a cloud based mobile internet platform and central hub for managing Monnit and ALTA products. All data is secured on dedicated servers operating Microsoft SQL Server. This online user interface is where all your device settings can be arranged, supervised, and modified to reflect your unique environment. OneTemp will look after the activation and setup of your new online iMonnit account free of charge. There is also a free mobile app for you to stay in control at all times. Start with the basic version or upgrade to iMonnit Premiere to enjoy the full features your Monnit experience can offer.


    iMonnit Basic Vs Premiere:

    • Basic - Free with no ongoing costs
      Monnit Basic is included for free with all wireless sensors, providing basic features for you to configure and monitor your sensors online. These basic features only support one network and one registered user on an account.
    • Premiere - Minimal Annual Fee
      iMonnit Premiere allows for enhanced functionality of your wireless sensors and includes an advanced software feature set at a low annual cost. All of iMonnit's advanced features are availble for configuration. You can have more sensors on your account, support multiple users, and view floorplans for all your sensors.

    Learn more about the iMonnit Premier Online Software>>

     


    Technical Information
    Supply voltage 2.0-3.8 VDC (3.0-3.8 VDC using power supply)1
    Current consumption 0.2 μA (sleep mode), 0.7 μA (RTC sleep), 570 μA (MCU idle), 2.5
    mA (MCU active), 5.5 mA (radio RX mode), 22.6 mA (radio TX
    mode)
    Operating temperature range (board circuitry and battery) -40°C to +85°C (-40°F to +185°F)2
    Included battery Max temperature range -40° to +85°C (-40° to +185°F)
    Capacity 1500 mAh
    Water rope material PE + alloy lead
    Water rope maximum exposed temperature 75°C (167°F)
    Water rope weight 30g/meter
    Water rope pull force limit 60kg
    Water rope core resistance 3ohm/100 meters
    Water rope cable diameter 5.5mm
    Water rope cable length 10 ft (120 in) included (expandable to 100 ft)
    Water rope fire resistance Second pressure plenum cable
    Integrated memory Up to 3200 sensor messages
    Wireless range 1,200+ ft non-line-of-sight
    Security Encrypt-RF® (256-bit key exchange and AES-128 CTR)
    Weight 4.7 ounces
    Enclosure rating NEMA 1, 2, 4, 4x, 12, and 13 rated, sealed, and weatherproof
    UL rating UL Listed to UL508-4x specifications (File E194432)
    Certifications 900 MHz product; FCC ID: ZTL-G2SC1 and IC: 9794A-G2SC1.
    868 and 433 MHz product tested and found to comply with: EN
    300 220-2 V3.1.1 (2017-02), EN 300 220-2 V3.1.1 (2017-02),
    and EN 60950

    1 Hardware cannot withstand negative voltage. Please take care when connecting a power device.
    2 At temperatures above 100°C, it is possible for the board circuitry to lose programmed memory.

    Water detection sensor for industrial applications

    Data loss, irreparable damage, lost revenue—all could have been avoided through the early detection with a Monnit Industrial Water Rope Sensor.

    When liquid contacts the sensor’s conductive polymer rope, the sensor instantly activates its onboard RF radio and transmits water presence data to the iMonnit Sensor Configuration and Management software and facilitates a near-instantaneous text, call, or email alert.

    The Water Rope Sensor detects conductive liquids anywhere along the length of the detection rope by using two wires covered with conducting polymer. When water or conductive liquid contacts the rope, the sensor will immediately turn on the RF radio. Then, the sensor transmits the data to the wireless gateway and the iMonnit Online Sensor Monitoring and Notification System, allowing you to immediately receive an alert by SMS text, email, or voice call. The sensor rope quickly dries so it can reset.


    More ways to monitor for leaks and spills

    The sensor comes with an industrial battery included with the life of up to 7 years. This water detection sensor comes with 10 feet of a sensing lead or detection rope. Additional 10-ft sections are available and can be connected up to 100 feet.

    All industrial sensors are enclosed in a reliable, weatherproof NEMA-rated enclosure that are constructed for both indoor and outdoor use. These rugged enclosures protect the sensor circuitry against;

    • Falling dirt
    • Wind-blown dust
    • Rain, sleet, snow, splashing water, and hose-directed water
    • Ice formation on the enclosure
    • Increased resistance to corrosion


    Features

    • Impressive wireless range of up to 1,200 feet through walls
    • Frequency-hopping spread spectrum (FHSS)
    • Improved interference immunity
    • Improved power management for longer battery life
    • Encrypt-RF® Security (Diffie-Hellman Key Exchange + AES-128 CBC for sensor data messages)
    • Stores 2000 to 4000 readings if gateway connection is lost (non-volatile flash, persists through the power cycle)
      • 10-minute heartbeats = ~ 22 days
      • 2-hour heartbeats = ~ 266 days
    • Over-the-air updates
    • Free iMonnit basic online wireless sensor monitoring and notification system to configure sensors, view data and set alerts via SMS text and email


    Applications

    • Frozen or Burst Pipe Monitoring
    • Reservoir Level Monitoring
    • Storage Unit Monitoring
    • Water Intrusion Monitoring
    • Freezers and coolers
    • Document retention center monitoring
    • Basement water monitoring
    • HVAC system operation and testing
    • Environmental monitoring
    • Boat bilge monitoring


    IMPORTANT - Sensor Operation

    Please note: this sensor requires both an applicable Gateway and iMonnit software to operate. For further information, please refer to the tabs above or related products below.


    Related products
    Picture of iMonnit Cloud Sensor Management Software

    iMonnit Cloud Sensor Management Software

    iMonnit Basic & Premiere Wireless Web Based Sensor Monitoring and Notification Systems.
    $0.00 (ex gst)
    Picture of Monnit Ethernet Gateway

    Monnit Ethernet Gateway

    The MonnitLink Ethernet gateway allows your Monnit Wireless Sensors to communicate with the iMonnit™ Online Wireless Sensor Monitoring and Notification System without the need for a PC
    $613.00 (ex gst)
    Picture of Monnit IoT Gateway (4G)

    Monnit IoT Gateway (4G)

    The ALTA® by Monnit Wireless IoT Gateway combines a 4G LTE CAT-M1/NB2 cellular engine and Ethernet platform (commercial only) with Monnit’s wireless access point network to aggregate and communicate data from Monnit ALTA Wireless Sensors.
    $958.00 (ex gst)
    Monnit Enterprise Water Rope Sensor (Wireless)

    Monnit Enterprise Water Rope Wireless Sensor

    When liquid makes contact with the sensor’s conductive polymer rope, the sensor transmits this data resulting in an alert in real time via text, call, or email.
    $591.00 (ex gst)

    Quality Guaranteed

    Information
    My account
    Customer service

    Safe & Secure Payments

    Quality Guaranteed

    Copyright © 2024 Onetemp. All rights reserved.