Explore the potential of IoT in enhancing workspace efficiency and sustainability - Try a POC kit today >>

Explore the potential of IoT in enhancing workspace efficiency and sustainability - Try a POC kit today >>

Menu
Search
Search Our Catalogue Close
Shopping cart Close
Menu Close
All Categories

    Monnit Puck Water Detection Wireless Sensor

    Manufacturer:
    A fully submersible sensor to detect the presence or absence of water in virtually any location.
    Part Number: MNS2-4-PK-WS-PS
    Back to Previous Page
    Product Files
    $394.00 ex GST
    i h

    Check Water’s Status Across Your Facilities

    Sealed in a hockey puck made of nearly indestructible vulcanized rubber, Monnit’s Commercial Wireless Water Detection Puck Sensor is a novel way to monitor water presence or absence in a wide variety of facilities and locations.

    With the perfect union of form and function, you can use the fully submersible, waterproof sensing device to face off against potential water damage by detecting leaks, flooding, and pooling. Or quickly sense the absence of water or other liquids in troughs, tanks, and containers. Place the versatile Water Detection Puck Sensor in virtually any facility area, including restrooms, kitchens, server rooms, boiler rooms, production lines, or under aging machines and systems.


    Drop-in Monitoring

    The sensor deploys in less than 15 minutes. Drop it under problematic plumbing, leaky windows, or tanks and turn it on via a magnetic contact switch. Once water or liquid rises approximately 1.6 millimetres under the probe, the sensor’s probes detect the water’s presence. This triggers an alert that’s sent via text, email, or call. Similarly, you can configure the sensor’s settings to detect the absence of water or liquid and immediately alert you.

    Monnit’s Commercial Wireless Water Detection Puck Sensor detects when water is present by completing the circuit between the two probe points (exposed stainless steel metal screw heads) on the bottom of the sensor. When detection state changes (water present or absent), the sensor will immediately turn on the radio and transmit the data to the wireless gateway and the iMonnit Online Sensor Monitoring and Notification System. Once data is received in iMonnit, the user-configurable notification system can send emails, text messages, and automated phone calls to alert you of any changes to the sensor. The sensor detects both the presence and absence of water.

    This sensor come standard with a non-replaceable 3.6V battery and has a typical battery life of approximately 10 years.


    Features

    • Impressive wireless range of up to 1,200 feet through walls
    • Frequency-hopping spread spectrum (FHSS)
    • Improved interference immunity
    • Improved power management for longer battery life
    • Encrypt-RF® Security (Diffie-Hellman Key Exchange + AES-128 CBC for sensor data messages)
    • Stores 2000 to 4000 readings if gateway connection is lost (non-volatile flash, persists through the power cycle)
      • 10-minute heartbeats = ~ 22 days
      • 2-hour heartbeats = ~ 266 days
    • Over-the-air updates
    • Free iMonnit basic online wireless sensor monitoring and notification system to configure sensors, view data and set alerts via SMS text and email


    Applications

    • Water Leak Detection
    • Greenhouses
    • Hospitals and Clinics
    • Laboratories and Pharmaceutical
    • Agriculture and Livestock Operations
    • Data Centre Water Intrusion Monitoring
    • HVAC Systems Monitoring
    • Reservoir / tank-level monitoring


    IMPORTANT - Sensor Operation

    Please note: this sensor requires both an applicable Gateway and iMonnit software to operate. For further information, please refer to the tabs above or related products below.

    Monnit Gateway Options

    An integral component of any IoT network is the gateway. A gateway device allows for data from sensors to be transmitted to the iMonnit software platform.


    Monnit Ethernet Wireless Gateway 4

    Monnit’s Ethernet Gateways allow your Monnit Wireless Sensors to communicate with the iMonnit™ Online Wireless Sensor Monitoring and Notification System without the need for a PC. Simply provide power and plug the gateway into an open Ethernet network port with an internet connection. It will then automatically connect with our online servers, providing the perfect solution for commercial locations where there is an active internet connection.

    Learn more about the Ethernet Wireless Gateway 4>>



    Monnit 4G + Ethernet IoT Gateway

    The ALTA® by Monnit Wireless IoT Gateway combines a 4G LTE CAT-M1/NB2 cellular engine and Ethernet platform with Monnit’s wireless access point network to aggregate and communicate data from Monnit ALTA Wireless Sensors. The ALTA IoT Gateway allows ALTA Sensors to operate on the world’s leading cellular networks and stay connected to the Internet. The gateway uses AC main power but also has redundant power through a battery backup lasting up to 60 hours.

    To meet the global demand for enterprise IoT deployment, the IoT Gateway communicates with the cloud-based iMonnit® monitoring software via cellular transmission, making it ideal for remote locations or where the Internet isn’t available. The RJ-45 Ethernet jack allows local device configuration, diagnostics, and connectivity backup. The IoT Gateway is instrumental in sending sensor notifications via text, email, or call if user-defined conditions are met or exceeded.

    Learn more about the 4G + Ethernet Wireless Gateway 4>>


    Online Sensor Monitoring Software

    iMonnit is a cloud based mobile internet platform and central hub for managing Monnit and ALTA products. All data is secured on dedicated servers operating Microsoft SQL Server. This online user interface is where all your device settings can be arranged, supervised, and modified to reflect your unique environment. OneTemp will look after the activation and setup of your new online iMonnit account free of charge. There is also a free mobile app for you to stay in control at all times. Start with the basic version or upgrade to iMonnit Premiere to enjoy the full features your Monnit experience can offer.


    iMonnit Basic Vs Premiere:

    • Basic - Free with no ongoing costs
      Monnit Basic is included for free with all wireless sensors, providing basic features for you to configure and monitor your sensors online. These basic features only support one network and one registered user on an account.
    • Premiere - Minimal Annual Fee
      iMonnit Premiere allows for enhanced functionality of your wireless sensors and includes an advanced software feature set at a low annual cost. All of iMonnit's advanced features are availble for configuration. You can have more sensors on your account, support multiple users, and view floorplans for all your sensors.

    Learn more about the iMonnit Premier Online Software>>

     


    Technical Information
    Electronics Supply Voltage 2.0-3.8 VDC
    Current Consumption 0.2 μA (sleep mode), 0.7 μA (RTC sleep), 570 μA (MCU idle),
    2.5 mA (MCU active), 5.5 mA (radio RX mode), 22.6 mA (radio
    TX mode)
    Operating Temperature Range -40°C to 85°C (-40° F to 185° F)1
    Dimensions 75mm (diameter), 25mm (height), 30mm (height with rubber
    feet)
    Water Protection Completely sealed, waterproof, fully submersible
    Battery 3.6V 1200 mAh Lithium (non-replaceable)
    Typical battery Life 10 years at a 10 minute heartbeat2
    Data-logged Memory 56 kBytes, 2000 - 4000 messages, persists through power
    cycle or device reset3
    Wireless Range 1,200+ ft non-line-of-sight
    Enclosure Vulcanized rubber
    Security Encrypt-RF® (256-bit key exchange and AES-128 CTR)
    Weight 7.6 ounces
    Water Detection Minimum Height 1.6mm (1/16")
    Certifications 900 MHz product; FCC ID: ZTL-G2SC1 and IC:
    9794A-G2SC1. 868 and 433 MHz product tested and found to
    comply with: EN 300 220-2 V3.1.1 (2017-02), EN 300 220-2
    V3.1.1 (2017-02), and EN 60950

    1 At temperatures above 100°C, it is possible for the board circuitry to lose programmed memory. Effective capacity of the battery can
    be reduced by up to 50% when operating below 0° c.
    2 Battery life is determined by the sensor reporting frequency and other variables.
    3 Sensors are configured to data log by default. When not configured, sensors will log two kBytes and the log will not persist through
    a power cycle or reset of the sensor.

    Check Water’s Status Across Your Facilities

    Sealed in a hockey puck made of nearly indestructible vulcanized rubber, Monnit’s Commercial Wireless Water Detection Puck Sensor is a novel way to monitor water presence or absence in a wide variety of facilities and locations.

    With the perfect union of form and function, you can use the fully submersible, waterproof sensing device to face off against potential water damage by detecting leaks, flooding, and pooling. Or quickly sense the absence of water or other liquids in troughs, tanks, and containers. Place the versatile Water Detection Puck Sensor in virtually any facility area, including restrooms, kitchens, server rooms, boiler rooms, production lines, or under aging machines and systems.


    Drop-in Monitoring

    The sensor deploys in less than 15 minutes. Drop it under problematic plumbing, leaky windows, or tanks and turn it on via a magnetic contact switch. Once water or liquid rises approximately 1.6 millimetres under the probe, the sensor’s probes detect the water’s presence. This triggers an alert that’s sent via text, email, or call. Similarly, you can configure the sensor’s settings to detect the absence of water or liquid and immediately alert you.

    Monnit’s Commercial Wireless Water Detection Puck Sensor detects when water is present by completing the circuit between the two probe points (exposed stainless steel metal screw heads) on the bottom of the sensor. When detection state changes (water present or absent), the sensor will immediately turn on the radio and transmit the data to the wireless gateway and the iMonnit Online Sensor Monitoring and Notification System. Once data is received in iMonnit, the user-configurable notification system can send emails, text messages, and automated phone calls to alert you of any changes to the sensor. The sensor detects both the presence and absence of water.

    This sensor come standard with a non-replaceable 3.6V battery and has a typical battery life of approximately 10 years.


    Features

    • Impressive wireless range of up to 1,200 feet through walls
    • Frequency-hopping spread spectrum (FHSS)
    • Improved interference immunity
    • Improved power management for longer battery life
    • Encrypt-RF® Security (Diffie-Hellman Key Exchange + AES-128 CBC for sensor data messages)
    • Stores 2000 to 4000 readings if gateway connection is lost (non-volatile flash, persists through the power cycle)
      • 10-minute heartbeats = ~ 22 days
      • 2-hour heartbeats = ~ 266 days
    • Over-the-air updates
    • Free iMonnit basic online wireless sensor monitoring and notification system to configure sensors, view data and set alerts via SMS text and email


    Applications

    • Water Leak Detection
    • Greenhouses
    • Hospitals and Clinics
    • Laboratories and Pharmaceutical
    • Agriculture and Livestock Operations
    • Data Centre Water Intrusion Monitoring
    • HVAC Systems Monitoring
    • Reservoir / tank-level monitoring


    IMPORTANT - Sensor Operation

    Please note: this sensor requires both an applicable Gateway and iMonnit software to operate. For further information, please refer to the tabs above or related products below.

    Related products
    Picture of iMonnit Cloud Sensor Management Software

    iMonnit Cloud Sensor Management Software

    iMonnit Basic & Premiere Wireless Web Based Sensor Monitoring and Notification Systems.
    $0.00 (ex gst)
    Picture of Monnit Enterprise Water Detection Wireless Sensor

    Monnit Enterprise Water Detection Wireless Sensor

    The sensor detects when water is present by completing the circuit between the two wires at the end of the water detection lead. When the detection state changes the sensor will immediately turn on the RF radio and transmit the data to allow the user to receive a notification
    from $285.00 (ex gst)
    Picture of Monnit Industrial Water Detection Wireless Sensor

    Monnit Industrial Water Detection Wireless Sensor

    The sensor detects when water is present by completing the circuit between the two wires at the end of the water detection lead. When the detection state changes the sensor will immediately turn on the RF radio and transmit the data to allow the user to receive a notification
    from $508.00 (ex gst)
    Picture of Monnit Ethernet Gateway

    Monnit Ethernet Gateway

    The MonnitLink Ethernet gateway allows your Monnit Wireless Sensors to communicate with the iMonnit™ Online Wireless Sensor Monitoring and Notification System without the need for a PC
    $613.00 (ex gst)

    Quality Guaranteed

    Information
    My account
    Customer service

    Safe & Secure Payments

    Quality Guaranteed

    Copyright © 2024 Onetemp. All rights reserved.