Explore the potential of IoT in enhancing workspace efficiency and sustainability - Try a POC kit today >>

Explore the potential of IoT in enhancing workspace efficiency and sustainability - Try a POC kit today >>

Menu
Search
Search Our Catalogue Close
Shopping cart Close
Menu Close
All Categories

    Monnit Industrial Soil Moisture Wireless Sensor

    Manufacturer:
    The Soil Moisture Sensor measures soil water tension (matric potential) and temperature with a 5’ lead
    Part Number: MNS2-4-IN-WS-WM-L05
    Back to Previous Page
    Product Files
    $1,110.00 ex GST
    i h

    Monitor your soils water and temperature condition and improve irrigation scheduling

    It’s easy to know your soil’s water and temperature condition with Monnit’s Soil Moisture Wireless Sensor. It provides a highly effective way to improve irrigation scheduling and efficiency. You’ll know when and where to water your crops, plants, or landscape from the data you gather.


    See water tension to prevent water stress

    The Soil Moisture Sensor measures soil water tension (matric potential) and temperature. With a resistive granular matrix element, you can optimize your tension parameters to determine the earliest indication of water stress and make sure you irrigate before it reaches that point. The unique element feature delivers consistent calibration without needing to recalibrate for every installation.

    The Sensor also has a thermistor-based temperature element. Its readings will help you assess temperature -40°C to 125°C (-40°F to 257°F) and the moisture’s temperature compensation, eliminating the need to measure moisture every time the soil temperature changes.


    Key features of our Soil Moisture Sensor include:

    • Safe and durable in both hot and freezing temperatures
    • Measure within a range of 0 to 240 centibar (cb) or kilopascal (kPa)
    • Corrosion-resistant and made of high-grade stainless steel
    • Internally compensated for commonly found salinity levels
    • Easy to install and use compared to traditional tensiometers
    • Includes a 5-ft. removable lead 

    The sensor’s moisture element is unique because it works similar to a plant’s root by measuring water tension in its hydrophilic fabric-covered matrix material rather than the surrounding soil. 

    The Soil Moisture Sensor has a removable soil moisture/temperature lead and a single sensor base. The sensor works best when you bury the lead or soil probe within or very close to a plant or tree root system. The sensor also works well in most soil types.

    This sensor comes with an industrial battery included with the life of up to 7 years.

    All industrial sensors are enclosed in a reliable, weatherproof NEMA-rated enclosure that are constructed for both indoor and outdoor use. These rugged enclosures protect the sensor circuitry against;

    • Falling dirt
    • Wind-blown dust
    • Rain, sleet, snow, splashing water, and hose-directed water
    • Ice formation on the enclosure
    • Increased resistance to corrosion


    Features

    • Impressive wireless range of up to 1,200 feet through walls
    • Frequency-hopping spread spectrum (FHSS)
    • Improved interference immunity
    • Improved power management for longer battery life
    • Encrypt-RF® Security (Diffie-Hellman Key Exchange + AES-128 CBC for sensor data messages)
    • Stores 2000 to 4000 readings if gateway connection is lost (non-volatile flash, persists through the power cycle)
      • 10-minute heartbeats = ~ 22 days
      • 2-hour heartbeats = ~ 266 days
    • Over-the-air updates
    • Free iMonnit basic online wireless sensor monitoring and notification system to configure sensors, view data and set alerts via SMS text and email


    Applications

    • Greenhouse soil monitoring
    • Crop monitoring
    • Smart watering
    • Agronomy research
    • Precision irrigation
    • Forestry
    • Construction
    • Mining


    IMPORTANT - Sensor Operation

    Please note: this sensor requires both an applicable Gateway and iMonnit software to operate. For further information, please refer to the tabs above or related products below.

    Monnit Gateway Options

    An integral component of any IoT network is the gateway. A gateway device allows for data from sensors to be transmitted to the iMonnit software platform.


    Monnit Ethernet Wireless Gateway 4

    Monnit’s Ethernet Gateways allow your Monnit Wireless Sensors to communicate with the iMonnit™ Online Wireless Sensor Monitoring and Notification System without the need for a PC. Simply provide power and plug the gateway into an open Ethernet network port with an internet connection. It will then automatically connect with our online servers, providing the perfect solution for commercial locations where there is an active internet connection.

    Learn more about the Ethernet Wireless Gateway 4>>



    Monnit 4G + Ethernet IoT Gateway

    The ALTA® by Monnit Wireless IoT Gateway combines a 4G LTE CAT-M1/NB2 cellular engine and Ethernet platform with Monnit’s wireless access point network to aggregate and communicate data from Monnit ALTA Wireless Sensors. The ALTA IoT Gateway allows ALTA Sensors to operate on the world’s leading cellular networks and stay connected to the Internet. The gateway uses AC main power but also has redundant power through a battery backup lasting up to 60 hours.

    To meet the global demand for enterprise IoT deployment, the IoT Gateway communicates with the cloud-based iMonnit® monitoring software via cellular transmission, making it ideal for remote locations or where the Internet isn’t available. The RJ-45 Ethernet jack allows local device configuration, diagnostics, and connectivity backup. The IoT Gateway is instrumental in sending sensor notifications via text, email, or call if user-defined conditions are met or exceeded.

    Learn more about the 4G + Ethernet Wireless Gateway 4>>


    Online Sensor Monitoring Software

    iMonnit is a cloud based mobile internet platform and central hub for managing Monnit and ALTA products. All data is secured on dedicated servers operating Microsoft SQL Server. This online user interface is where all your device settings can be arranged, supervised, and modified to reflect your unique environment. OneTemp will look after the activation and setup of your new online iMonnit account free of charge. There is also a free mobile app for you to stay in control at all times. Start with the basic version or upgrade to iMonnit Premiere to enjoy the full features your Monnit experience can offer.


    iMonnit Basic Vs Premiere:

    • Basic - Free with no ongoing costs
      Monnit Basic is included for free with all wireless sensors, providing basic features for you to configure and monitor your sensors online. These basic features only support one network and one registered user on an account.
    • Premiere - Minimal Annual Fee
      iMonnit Premiere allows for enhanced functionality of your wireless sensors and includes an advanced software feature set at a low annual cost. All of iMonnit's advanced features are availble for configuration. You can have more sensors on your account, support multiple users, and view floorplans for all your sensors.

    Learn more about the iMonnit Premier Online Software>>

     



    How Soil Moisture Sensors Work

    With a long-range, multi-frequency radio and flexible microcontroller, Monnit's Industrial Soil Moisture Wireless Sensor tells you on a mobile device or computer how much, when, and where to water crops.

    >> Learn More


    Guide on How to Install the Soil Moisture Sensor

    Monnit's Industrial Soil Moisture Wireless Sensor is easy to install when you know its external features and the supplies and tools you need to complete the installation process.

    >> Learn More 


    How to Interpret Data from your Soil Moisture Sensor

    Monnit's Industrial Soil Moisture Wireless Sensor measures soil water status in centibars (cb) or kilopascals (kPa) of soil water tension. This value represents the energy a plant’s root system uses to draw water from the soil. As you analyze and interpret your sensor readings, you gain a clearer view of what is happening with the soil moisture in your crop’s root system.

    >> Learn More


    How to Install the Soil Moisture Sensor by Field and Crop Type

    Monnit's Industrial Soil Moisture Wireless Sensor is suited for five different types of installations. These installations vary based on crop type and planting scheme.

    >> Learn More

    Technical Information

    Soil Moisture Sensor Platform Specifications
    Supply Voltage 2.0-3.8 VDC (3.0-3.8 VDC using power supply) 1
    Current Consumption 0.2 μA (sleep mode), 0.7 μA (RTC sleep), 570 μA (MCU
    idle), 2.5 mA (MCU active), 5.5 mA (radio RX mode), 22.6
    mA (radio TX mode)
    Operating Temperature Range -40°C to +80°C (-40°F to +176°F)
    Included Battery Max Temperature Range -40°C to +80°C (-40°F to +176°F)
    Capacity 1500 mAh
    Data Logging Data logs 2000 to 4000 readings if gateway connection is
    lost (non-volatile flash, persists through the power cycle):
    - 10-minute heartbeats = ~ 22 days
    - 2-hour heartbeats = ~ 266 days
    Wireless Range 1,200+ ft non-line-of-sight
    Weight Encrypt-RF® (256-bit key exchange and AES-128 CTR)
    Security 4.23 ounces (120 g)
    Enclosure Rating NEMA 1, 2, 4, 4x, 12, & 13 rated, sealed, & weatherproof
    UL Rating UL Listed to UL508-4x specifications (File E194432)
    Cartifications 900 MHz product; FCC ID: ZTL-G2SC1 and IC:
    9794A-G2SC1. 868 and 433 MHz product tested and
    found to comply with: EN 300 220-2 V3.1.1 (2017-02), EN
    300 220-2 V3.1.1 (2017-02) and EN 60950


    1     Hardware cannot withstand negative voltage. Please take care when connecting a power device.

    Sensor Specifications
    Moisture Sensing Element
    Element Type Resistive element with granular matric
    Range 0.0 to 240.0 centibar or kPa (Water Tension)
    Resolution ~0.3 centibar or kPa1
    Dimensions Diameter: 0.875 in. (22 mm)
    Length: 3.25 in. (83 mm)
    Materials ABS plastic caps with stainless steel body over a hydrophilic fabric
    covered granular matrix. (Will not dissolve in soil or be
    compromised by freezing temperatures)
    Response Time ~5 Minutes 2
    Temperature Sensing Element
    Element Type Thermistor embedded in sealed metal bullet
    Accuracy +/- 1.0 Celsius
    Measurement Range -40° C to 125° C (-40° F to 257° F)
    Resolution 0.1° C
    Response Time Typically less than 15 seconds
    Cable Physical Specications
    General Composition Soil moisture and temperature leads coupled together in a single
    sealed cable wrapped in a braided sleeve. Sleeve ends fixed using
    adhesive lined heat shrink.
    Length 63 in. (160 cm)
    Connector End Keyed M8 6-pin female connector, with M8 female coupling collar.
    Cable Sleeve material Polyethylene terephthalate (PET)
    Overall Cable Operating Temperature -40° C to 80° C (-40° F to 176° F) 3,4
    Weight 4.07 oz. (115 g)
    Sensor Base Connector
    Base Connector Keyed M8 6-pin male connector
    Data
    User Interface:
    xxx.x centibars or kPa, xxx.x° C or F 5    		 Raw Data:
    Soil Moisture: unsigned int, raw / 10 = centibars
    Temperature: signed int, raw / 10 = Celsius


    1 The resolution increases as the centibar readings get lower. Resolution at 0 centibar is ~0.05 centibar, at 240 centibar it is ~0.36 centibar. The sensor is
    limited to 0.1 centibar by the sensor firmware.
    2 Response time calculated by measuring time it takes for sensor to go from fully dry to saturated by placing moisture element upright in 1" of water. Actual
    response times may vary.
    3 Heatshrink adhesive melts at ~85° C. Using at temperatures at or above this level may compromise the waterproofing of the cable and allow the heatshrink
    and sleeve to slip and become loose.
    4 The soil moisture element will not work properly while frozen but when thawed the sensor readings will return to normal.
    5 UI units are user configurable via software.

    Monitor your soils water and temperature condition and improve irrigation scheduling

    It’s easy to know your soil’s water and temperature condition with Monnit’s Soil Moisture Wireless Sensor. It provides a highly effective way to improve irrigation scheduling and efficiency. You’ll know when and where to water your crops, plants, or landscape from the data you gather.


    See water tension to prevent water stress

    The Soil Moisture Sensor measures soil water tension (matric potential) and temperature. With a resistive granular matrix element, you can optimize your tension parameters to determine the earliest indication of water stress and make sure you irrigate before it reaches that point. The unique element feature delivers consistent calibration without needing to recalibrate for every installation.

    The Sensor also has a thermistor-based temperature element. Its readings will help you assess temperature -40°C to 125°C (-40°F to 257°F) and the moisture’s temperature compensation, eliminating the need to measure moisture every time the soil temperature changes.


    Key features of our Soil Moisture Sensor include:

    • Safe and durable in both hot and freezing temperatures
    • Measure within a range of 0 to 240 centibar (cb) or kilopascal (kPa)
    • Corrosion-resistant and made of high-grade stainless steel
    • Internally compensated for commonly found salinity levels
    • Easy to install and use compared to traditional tensiometers
    • Includes a 5-ft. removable lead 

    The sensor’s moisture element is unique because it works similar to a plant’s root by measuring water tension in its hydrophilic fabric-covered matrix material rather than the surrounding soil. 

    The Soil Moisture Sensor has a removable soil moisture/temperature lead and a single sensor base. The sensor works best when you bury the lead or soil probe within or very close to a plant or tree root system. The sensor also works well in most soil types.

    This sensor comes with an industrial battery included with the life of up to 7 years.

    All industrial sensors are enclosed in a reliable, weatherproof NEMA-rated enclosure that are constructed for both indoor and outdoor use. These rugged enclosures protect the sensor circuitry against;

    • Falling dirt
    • Wind-blown dust
    • Rain, sleet, snow, splashing water, and hose-directed water
    • Ice formation on the enclosure
    • Increased resistance to corrosion


    Features

    • Impressive wireless range of up to 1,200 feet through walls
    • Frequency-hopping spread spectrum (FHSS)
    • Improved interference immunity
    • Improved power management for longer battery life
    • Encrypt-RF® Security (Diffie-Hellman Key Exchange + AES-128 CBC for sensor data messages)
    • Stores 2000 to 4000 readings if gateway connection is lost (non-volatile flash, persists through the power cycle)
      • 10-minute heartbeats = ~ 22 days
      • 2-hour heartbeats = ~ 266 days
    • Over-the-air updates
    • Free iMonnit basic online wireless sensor monitoring and notification system to configure sensors, view data and set alerts via SMS text and email


    Applications

    • Greenhouse soil monitoring
    • Crop monitoring
    • Smart watering
    • Agronomy research
    • Precision irrigation
    • Forestry
    • Construction
    • Mining


    IMPORTANT - Sensor Operation

    Please note: this sensor requires both an applicable Gateway and iMonnit software to operate. For further information, please refer to the tabs above or related products below.

    Related products
    Picture of Monnit IoT Gateway (4G)

    Monnit IoT Gateway (4G)

    The ALTA® by Monnit Wireless IoT Gateway combines a 4G LTE CAT-M1/NB2 cellular engine and Ethernet platform (commercial only) with Monnit’s wireless access point network to aggregate and communicate data from Monnit ALTA Wireless Sensors.
    $958.00 (ex gst)
    Picture of Monnit Ethernet Gateway

    Monnit Ethernet Gateway

    The MonnitLink Ethernet gateway allows your Monnit Wireless Sensors to communicate with the iMonnit™ Online Wireless Sensor Monitoring and Notification System without the need for a PC
    $613.00 (ex gst)
    Picture of Monnit Industrial PAR Light Wireless Meter

    Monnit Industrial PAR Light Wireless Meter

    Monnit’s Industrial PAR Light Wireless Meter monitors this spectral range (389 to 692 nanometres) from indoor and outdoor light sources, including LEDs.
    $4,547.00 (ex gst)
    Picture of iMonnit Cloud Sensor Management Software

    iMonnit Cloud Sensor Management Software

    iMonnit Basic & Premiere Wireless Web Based Sensor Monitoring and Notification Systems.
    $0.00 (ex gst)

    Quality Guaranteed

    Information
    My account
    Customer service

    Safe & Secure Payments

    Quality Guaranteed

    Copyright © 2024 Onetemp. All rights reserved.