Search
Menu Close

Calex PyroMiniUSB - Infrared Temperature Sensor for Benchtop, Laboratory and Education

Manufacturer:
The PyroMiniUSB is a miniature non-contact infrared temperature sensor with USB communications. It measures the surface temperature of a variety of materials without contact for temperatures from -20°C to 1000°C
*
Back to Previous Page
$0.00 ex GST
i h
Delivery date: 2-3 weeks

Rugged & Reliable Measurement for Laboratory, Benchtop and Education Uses 

The PyroMiniUSB is a miniature infrared sensor that measures the surface temperature of a solid or liquid without contact. It can measure non-metal surfaces between -20°C and 1000°C, with a response time of just 125 ms. Materials including paper, thick plastics, rubber, food and organic materials, as well as painted metals and most dirty, rusty or oily surfaces, are measured accurately, safely and cleanly.

A choice of optics is available to measure small or large targets at distances ranging from a few millimetres up to tens of metres. It has a rugged stainless steel housing, sealed to IP65, and is built to withstand ambient temperatures of up to 75°C.


Features

  • Miniature non-contact temperature sensor with USB communications
  • Measures temperatures from -20°C to 1000°C
  • USB cable included
  • Free software for data logging and configuration
  • Modbus protocol - use your own software to communicate with the sensor
  • Not designed or approved for fever detection


Two models are available

  • PMU21     PyroMiniUSB sensor with 2:1 optics – for large or close-up targets

  • PMU201   PyroMiniUSB sensor with 20:1 optics – for small or more distant targets


Compact

The sensor is just 45 mm long (plus cable gland), so it can fit into very small spaces. The USB interface is built into the sensor, so there is no need for additional bulky interface modules.


Benchtop and Labratory

With the precision and robustness of our industrial pyrometers, and the plug-and-play convenience of USB, the PyroMiniUSB is the ideal benchtop temperature sensor for testing and experimentation.


Education

The PyroMiniUSB is ideal for teaching science concepts such as emissivity, reflectivity, thermal conductivity, energy transfer, insulation and internal energy.


Software

See temperature readings and charts, and log data via USB in real time, with the free CalexConfig software for Windows.

CalexConfig is available to download free of charge at www.calex.co.uk/software.


CalexConfig Features

  • Simple, touch-friendly software for one sensor.
  • Temperature display (°C or °F)
  • Scrolling temperature chart
  • Data logging to comma-separated text file, Excel-compatible
  • Sensor configuration:
  • Emissivity setting
  • Averaging
  • Peak/valley hold processing
  • Reflected energy compensation

Target size and distance are critical to accuracy for most IR thermometers


   


Diagrams show the diameter of the measured spot versus the distance from the lens of the sensor. The measured spot sizes shown here contain 90% of the energy the sensor detects. We normally recommend the target size should be at least twice the measured spot size for maximum accuracy. All PyroMiniUSB models will measure at longer distances than the diagrams show, with a larger measured spot size.

Typical Applications


Benchtop and Laboratory

With the precision and robustness of our industrial pyrometers, and the plug-and-play convenience of USB, the PyroMiniUSB is the ideal benchtop temperature sensor for testing and experimentation.


Education

The PyroMiniUSB is ideal for teaching science concepts such as emissivity, reflectivity, thermal conductivity, energy transfer, insulation and internal energy.


Calibration Checking

Combined with a blackbody calibration source, the PyroMiniUSB makes the ideal calibration reference pyrometer. Keep one in your calibration room and check the performance of your other sensors against it. Calex can provide calibration certificates for traceability.

Technical Information

General Specifications

Temperature Range -20°C to 1000°C
Interface USB
Accuracy ±1% of reading or ±1ºC whichever is greater
Repeatability ± 0.5% of reading or ± 0.5°C whichever is greater
Emissivity 0.2 to 1.0
Response TIme, t90 125 ms (90% response)
Spectral Range 8 to 14 μm
Supply Voltage 5 V DC
Supply Current 50 mA max
Baud Rate 9600 baud (other configurations available upon request)
Modbus Data Format 8 data bits, no parity, 1 stop bit (other configurations available upon request)
Protocol Modbus over Serial Line

Configuration

Configuration Method Via USB using CalexConfig or other Modbus software (see Operator's Guide for Modbus details)
Configurable Parameters Emissivity Setting, Averaging, Reflected Energy Compensation

Mechanical Specifications

Construction Stainless Steel
Dimensions 18 mm diameter x 45 mm long (excluding cable gland)
Thread Mounting M16 x 1 mm pitch
USB Cable Length 1.45 m
Weight with Cable 85 g

Environmental Specifications

Environmental Rating IP65
Ambient Temperature Range 0°C to 75°C
Relative Humidity 95% max. non-condensing

Electromagnetic Compatibility Standards

EN61326-1, EN61326-2-3 (Electrical Equipment for Measurement, Control and Laboratory Use – EMC Requirements – Industrial)

Rugged & Reliable Measurement for Laboratory, Benchtop and Education Uses 

The PyroMiniUSB is a miniature infrared sensor that measures the surface temperature of a solid or liquid without contact. It can measure non-metal surfaces between -20°C and 1000°C, with a response time of just 125 ms. Materials including paper, thick plastics, rubber, food and organic materials, as well as painted metals and most dirty, rusty or oily surfaces, are measured accurately, safely and cleanly.

A choice of optics is available to measure small or large targets at distances ranging from a few millimetres up to tens of metres. It has a rugged stainless steel housing, sealed to IP65, and is built to withstand ambient temperatures of up to 75°C.


Features

  • Miniature non-contact temperature sensor with USB communications
  • Measures temperatures from -20°C to 1000°C
  • USB cable included
  • Free software for data logging and configuration
  • Modbus protocol - use your own software to communicate with the sensor
  • Not designed or approved for fever detection


Two models are available

  • PMU21     PyroMiniUSB sensor with 2:1 optics – for large or close-up targets

  • PMU201   PyroMiniUSB sensor with 20:1 optics – for small or more distant targets


Compact

The sensor is just 45 mm long (plus cable gland), so it can fit into very small spaces. The USB interface is built into the sensor, so there is no need for additional bulky interface modules.


Benchtop and Labratory

With the precision and robustness of our industrial pyrometers, and the plug-and-play convenience of USB, the PyroMiniUSB is the ideal benchtop temperature sensor for testing and experimentation.


Education

The PyroMiniUSB is ideal for teaching science concepts such as emissivity, reflectivity, thermal conductivity, energy transfer, insulation and internal energy.


Software

See temperature readings and charts, and log data via USB in real time, with the free CalexConfig software for Windows.

CalexConfig is available to download free of charge at www.calex.co.uk/software.


CalexConfig Features

  • Simple, touch-friendly software for one sensor.
  • Temperature display (°C or °F)
  • Scrolling temperature chart
  • Data logging to comma-separated text file, Excel-compatible
  • Sensor configuration:
  • Emissivity setting
  • Averaging
  • Peak/valley hold processing
  • Reflected energy compensation