Magnelab RopeCT - Rogowski coil AC Current Sensor

Description

The Magnelab RCT series of single-phase flexible RopeCT® current sensor kits measure AC current up to 5,000 Amps with a 0.333 Volt AC output

• The RCT Series integrator (signal conditioner) converts the RopeCT® (Rogowski Coil) input voltage to 0.333 volt AC output
• The integrator requires a DC power supply which operates from 12 to 30V AC or DC (not included)
• The flexible Rogowski coils are available in lengths of 12", 18", 24", 36", 48" and are extremely flexible
• The flexible Rogowski coils open at the connector junction and may be installed on a bus bar or existing cable in a matter of seconds
• Features
  • Inputs from 250 Amp to 5,000
  • Output 0.333 V (333 mVac) at rated current
  • No Integrator model -000 see Ratio for output
  • Linearity Accuracy ±1%
  • Accuracy from 100 Amps to maximum Amps
  • Phase angle < 0.5 degrees
  • Integrator requires power supply 12 to 30V AC or DC (not included)
  • 8 ft. twisted pair leads
  • Maximum Voltage: 600 V (on bare conductor)

Note: The integrator requires a power supply of 12 to 30V AC or DC, which is not included.  Plug Pack Type: AC-SENS-1 12VDC DIN rail Type: PWS-10-F 24VDC Frequent Applications Energy sub-meters Power meters Power quality monitoring Condition monitoring Distributed measurement systems

Features Input from 250 Amp to 5,000 Amp Output of 0.333 Volt at rated current Linearity Accuracy 1% Accuracy from 100 Amps to 15,000 Amps Phase angle < 0.5 degrees measured at 50% rated current Integrator requires power supply 12 to 30V AC or DC (not included) 8 ft. twisted pair leads Maximum Voltage: 600 V (on bare conductor) 10-Year Warranty