VCP TIC - Immersion Temperature Sensors

The immersion temperature sensor TIC is a direct output temperature sensor thermistor sensing element NTC 10K or platina sensing element PT1000, other sensing elements on request. The tolerances is at 25°C for the immersion temperature sensor TIC is +/- 0.22°C for NTC 10K and +/- 0.42°C for PT1000.

TIC immersion temperature sensor have simple 2-wire connection (3-wire and 4-wire on request) and the sensing element for the immersion temperature sensor TIC is located in the end of the probe.

Immersion temperature sensor TIC have IP65 enclosure and the wiring connection for immersion temperature sensor TIC is inside the ABS plastic enclosure on a screw clamp connection max 1.5 mm. The enclosure of immersion temperature sensor TIC is supplied with a plastic cable entry gland M 16 x 1.5, including strain relief for cable diameter 4 to 10 mm. The TIC immersion temperature sensor have 4 quick locking screws in the cover of the enclosure. The Standard probe / pocket lenght for immersion temperature sensor TIC is 100 mm and on request the immersion temperature sensor TIC can be supplied with probe / pocket lenghts 50, 150, 200, 250 and 300 mm.

The probe of immersion temperature sensor TIC is made of quality steel. The brass pocket BRPS for immersion temperature sensor TIC can be used for operation pressures up to 16 bar and temperature up to 0 +150°C. The stainless steel pocket SSPVA for immersion temperature sensor TIC can be used for operation pressures up to 40 bar and temperature up to +400°C. The brass pocket BRPS and stainless steel pocket SSPVA for the immersion temperature sensor TIC have G1/2” threaded connector.

Immersion Temperature Sensors Features

• Standard sensing elements
  • Thermistor NTC 10K
  • Platinum PT1000
  • Tolerances at 25°C NTC 10K: +/- 0.22°C PT1000: +/- 0.42°C
  • Other sensing elements on request
    NTC 1.8K, NTC 5K, NTC 20K,
    Precon, KTY81-110, KTY81-210, LM235Z
    NI1000, NI1000/5000, PT1000.
• Standard probe length 100 mm - Other probe lenghts on request 50, 150, 200, 300 and 400 mm
• Stainless steel probe diameter 6mm
• Housing material plastic with IP65 protection
• Housing dimensions 75x69x44 mm excluding cable entry gland
• Cable entry gland M16x1.5 for cable diameter 4 to 10 mm
• 4 quick locking screws in the cover of the enclosure
• Screw clamp connection max 1.5 mm
• Simple 2-wire connection

Immersion Pockets Features

• Galvanized brass immersion pocket and stainless steel 1.4571 immersion pocket
• Standard immersion pocket length 100 mm - Other immersion pocket lenghts on request 50, 150, 200, 300 and 400 mm
• Connection Thread G ½” SW 22
• Fixture set screw M4 pressure screw SW 12
• Tmax 160C brass pocket and 400C stainless steel pocket
• Pressure resistance
  • up to 16 Bar static for brass pocket
  • up to 40 Bar static for stainless steel pocket