Explore the potential of IoT in enhancing workspace efficiency and sustainability - Try a POC kit today >>

Explore the potential of IoT in enhancing workspace efficiency and sustainability - Try a POC kit today >>

Menu
Search
Search Our Catalogue Close
Shopping cart Close
Menu Close
All Categories

    Intech pH Probes

    Manufacturer:
    A selection of general purpose pH probes.
    Part Number: Intech pH Probes
    Back to Previous Page
    Product Files
    Call for pricing

    pH Probes:

    Available Products:

    Model 10 – General purpose ½” NPT pH sensor:

    Temperature; -5~80°C.
    Pressure; 0~100 psi.
    Cable length; 3.3 metres.
    Ref. cell; Single junction, KCl/AgCl.
    Ref. junction; Porous teflon.
    Applications; Non-toxic solutions e.g. Potable water, cooling towers, fresh/salt water aquariums.

    M-10

    		 Model 10 - General purpose ½” NPT pH sensor.

    M-10-ORP

    		 Model 10-ORP - General purpose ½” NPT ORP sensor.
    Used for Redox measurement in relatively clean waters.

     

    Model 11 – General purpose ¾” NPT pH sensor:

    Temperature; 0~80°C.
    Pressure; 0~100 psi.
    Cable length; 3.3 metres.
    Ref. cell; Double junction, KNO3 and KCl/AgCl.
    High resistance to electrode poisoning solutions.
    Applications; For both submersible and insertable use in process and waste water.

    M-11

    		 Model 11 - General purpose ¾” NPT pH sensor.

    M-11-Pt100

    		 Model 11-Pt100 - General purpose ¾” NPT pH sensor.
    Includes a Pt100 sensor.

    M-11-Pt100-HT

    		 Model 11-Pt100-HT - General purpose ¾” NPT pH sensor.
    High temp. version including a Pt100 sensor.
    High temperature; 0~110°C.
    High pressure; 0~150 psi.
    Do not use where ethers, ketones and most aromatic hydrocarbons are present. If these solvents are present use the standard version regardless of the temperature.

    M-11-ORP

    		 Model 11-ORP - General purpose ¾” NPT ORP sensor.
    Used for Redox measurement in waste water treatment.
    Platinum sensing element.

     

    Model 12 – General purpose ¾” NPT pH sensor for flowing, viscous applications:

    Temperature; 0~80°C.
    Pressure; 0~100 psi.
    Cable length; 3.3 metres.
    Ref. cell; Double junction, KNO3 and KCl/AgCl.
    High resistance to electrode poisoning solutions.
    The concave sensor configuration protects the pH bulb from particulate matter and provides a cleansing flow without affecting the line pressure characteristics.
    Applications; Ideal for pipelines with flow velocities greater than 30 cm/sec.
    Typical applications include batching and process control in the chemical, petrochemical, pulp/paper and electroplating industries.

    M-12

    		 Model 12 - General purpose ¾” NPT pH sensor.

    M-12-Pt100

    		 Model 12-Pt100 - General purpose ¾” NPT pH sensor.
    Includes a Pt100 sensor.

    M-12-Pt100-HT

    		 Model 12-Pt100-HT - General purpose ¾” NPT pH sensor.
    High temp. version including a Pt100 sensor.
    High temperature; 0~110°C.
    High pressure; 0~150 psi.
    Do not use where ethers, ketones and most aromatic hydrocarbons are present. If these solvents are present use the standard version regardless of the temperature.

     

    Model 21 – General purpose ¾” NPT pH sensor with long insertion length:

    Temperature; 0~80°C.
    Pressure; 0~100 psi.
    Cable length; 3.3 metres.
    Ref. cell; Double junction, KNO3 and KCl/AgCl.
    High resistance to electrode poisoning solutions, typically those with cyanide, ammonia, sulphide and heavy metals in appreciable concentrations.
    Applications; A combination pH sensor for insertion in tanks and large diameter pipes using process and waste water.

    M-21

    		 Model 21 - General purpose ¾” NPT pH sensor with long insertion length.

    M-21-Pt100

    		 Model 21-Pt100 - General purpose ¾” NPT pH sensor with long insertion length.
    Includes a Pt100 sensor.

    M-21-Pt100-HT

    		 Model 21-Pt100-HT - General purpose ¾” NPT pH sensor with long insertion length.
    High temp. version including a Pt100 sensor.
    High temperature; 0~110°C.
    High pressure; 0~150 psi.
    Do not use where ethers, ketones and most aromatic hydrocarbons are present. If these solvents are present use the standard version regardless of the temperature.

     

    Notes:

    For alkaline conditions between pH 7 ~ 13 use a probe that has the –HT option.
    For conditions above pH 13 contact us

    The pH model type probes are ideal for use with our LPI-pH pH transmitter, or with our pH-HR pH data logger (for the best possible accuracy with the LPI-pH or pH-HR, we recommend using a probe that includes the -Pt100 sensor option).

    pH Probes:

    Available Products:

    Model 10 – General purpose ½” NPT pH sensor:

    Temperature; -5~80°C.
    Pressure; 0~100 psi.
    Cable length; 3.3 metres.
    Ref. cell; Single junction, KCl/AgCl.
    Ref. junction; Porous teflon.
    Applications; Non-toxic solutions e.g. Potable water, cooling towers, fresh/salt water aquariums.

    M-10

    		 Model 10 - General purpose ½” NPT pH sensor.

    M-10-ORP

    		 Model 10-ORP - General purpose ½” NPT ORP sensor.
    Used for Redox measurement in relatively clean waters.

     

    Model 11 – General purpose ¾” NPT pH sensor:

    Temperature; 0~80°C.
    Pressure; 0~100 psi.
    Cable length; 3.3 metres.
    Ref. cell; Double junction, KNO3 and KCl/AgCl.
    High resistance to electrode poisoning solutions.
    Applications; For both submersible and insertable use in process and waste water.

    M-11

    		 Model 11 - General purpose ¾” NPT pH sensor.

    M-11-Pt100

    		 Model 11-Pt100 - General purpose ¾” NPT pH sensor.
    Includes a Pt100 sensor.

    M-11-Pt100-HT

    		 Model 11-Pt100-HT - General purpose ¾” NPT pH sensor.
    High temp. version including a Pt100 sensor.
    High temperature; 0~110°C.
    High pressure; 0~150 psi.
    Do not use where ethers, ketones and most aromatic hydrocarbons are present. If these solvents are present use the standard version regardless of the temperature.

    M-11-ORP

    		 Model 11-ORP - General purpose ¾” NPT ORP sensor.
    Used for Redox measurement in waste water treatment.
    Platinum sensing element.

     

    Model 12 – General purpose ¾” NPT pH sensor for flowing, viscous applications:

    Temperature; 0~80°C.
    Pressure; 0~100 psi.
    Cable length; 3.3 metres.
    Ref. cell; Double junction, KNO3 and KCl/AgCl.
    High resistance to electrode poisoning solutions.
    The concave sensor configuration protects the pH bulb from particulate matter and provides a cleansing flow without affecting the line pressure characteristics.
    Applications; Ideal for pipelines with flow velocities greater than 30 cm/sec.
    Typical applications include batching and process control in the chemical, petrochemical, pulp/paper and electroplating industries.

    M-12

    		 Model 12 - General purpose ¾” NPT pH sensor.

    M-12-Pt100

    		 Model 12-Pt100 - General purpose ¾” NPT pH sensor.
    Includes a Pt100 sensor.

    M-12-Pt100-HT

    		 Model 12-Pt100-HT - General purpose ¾” NPT pH sensor.
    High temp. version including a Pt100 sensor.
    High temperature; 0~110°C.
    High pressure; 0~150 psi.
    Do not use where ethers, ketones and most aromatic hydrocarbons are present. If these solvents are present use the standard version regardless of the temperature.

     

    Model 21 – General purpose ¾” NPT pH sensor with long insertion length:

    Temperature; 0~80°C.
    Pressure; 0~100 psi.
    Cable length; 3.3 metres.
    Ref. cell; Double junction, KNO3 and KCl/AgCl.
    High resistance to electrode poisoning solutions, typically those with cyanide, ammonia, sulphide and heavy metals in appreciable concentrations.
    Applications; A combination pH sensor for insertion in tanks and large diameter pipes using process and waste water.

    M-21

    		 Model 21 - General purpose ¾” NPT pH sensor with long insertion length.

    M-21-Pt100

    		 Model 21-Pt100 - General purpose ¾” NPT pH sensor with long insertion length.
    Includes a Pt100 sensor.

    M-21-Pt100-HT

    		 Model 21-Pt100-HT - General purpose ¾” NPT pH sensor with long insertion length.
    High temp. version including a Pt100 sensor.
    High temperature; 0~110°C.
    High pressure; 0~150 psi.
    Do not use where ethers, ketones and most aromatic hydrocarbons are present. If these solvents are present use the standard version regardless of the temperature.

     

    Notes:

    For alkaline conditions between pH 7 ~ 13 use a probe that has the –HT option.
    For conditions above pH 13 contact us

    The pH model type probes are ideal for use with our LPI-pH pH transmitter, or with our pH-HR pH data logger (for the best possible accuracy with the LPI-pH or pH-HR, we recommend using a probe that includes the -Pt100 sensor option).

    Related products
    Picture of Intech LPI-pH - Isolating pH Voltage Input to 4~20mA Output Loop Powered Transmitter

    Intech LPI-pH - Isolating pH Voltage Input to 4~20mA Output Loop Powered Transmitter

    The LPI-pH is a loop powered, isolated, pH Cell input, to 4~20mA output transmitter, with integral Pt100 RTD temperature compensation, and LCD display of 0~14.00pH.
    $1,065.00 (ex gst)

    Quality Guaranteed

    Information
    My account
    Customer service

    Safe & Secure Payments

    Quality Guaranteed

    Copyright © 2024 Onetemp. All rights reserved.