Monnit Enterprise AC Current Meter Wireless Sensor
 

Holiday Closure: We will be closed from Mon, 23rd Dec & will return on Thurs, 2nd Jan 2025

Holiday Closure: We will be closed from Mon, 23rd Dec & will return on Thurs, 2nd Jan 2025

Menu
Search
Search Our Catalogue Close
Shopping cart Close
Menu Close
All Categories

    Monnit Enterprise AC Current Meter Wireless Sensor

    These sensors track the minimum, maximum, and average RMS current, as well as amp hours. If power consumption spikes or plummets beyond user-defined limits, an alert is sent via text, email, or call.
    Part Number: MNS2-4-W2-CM-XXX
    Manufacturer:
    0Types Available
    Back to Previous Page
    Product Files

    Plug & play sensors remotely monitor energy use

    Monnit’s Enterprise AC Current Meters installs quickly to provide insights on machine health or system performance via current usage. These sensors track the minimum, maximum, and average RMS current, as well as amp hours. If power consumption spikes or plummets beyond user-defined limits, an alert is sent via text, email, or call.

    Fluctuating power consumption often indicates that a machine needs maintenance, is nearing the end of its service life, or an unexpected supply issue. These current sensors are also ideal for submetering.

    Monnit’s AC Current Meter measures the RMS current of an alternating current (AC) system using a current transformer (CT) that wraps around the ‘hot’ wire of a two wire (hot, common, ground(optional)) power system. The sensor reports Minimum RMS current, maximum RMS current, average RMS current, and amp hours to the iMonnit system. The iMonnit system is capable of generating watt hour or kilowatt hour readings as well. The AC Current Meters are available with an option current transducers;

    • Low Current: 0-20 amp 
    • Medium Current: 0-150 amp


    Get amperage alerts

    To measure current, clip the CT around only a single wire of the AC system (clipping around a hot and neutral wire at the same time will result in 0 current readings). After the sensor powers on and connects to the gateway it will begin taking measurements based on the averaging interval (5 seconds default). It will report data to iMonnit every heartbeat or if the current goes outside of the aware thresholds set in iMonnit. The sensor reports amp hours, max RMS current, min RMS current, and average RMS current. iMonnit can also generate watt hour or kilowatt hour readings if a default RMS voltage is set in iMonnit. The AC Current meter can also:

    • Data logging for accumulated amp hour readings 
    • Can notify based on current levels or changes in current levels 

    The AC Current Meters come standard with two replaceable AA batteries. The typical battery life is approximately 10 years.

    WARNING: This AC current meter is for monitoring AC voltage only. Do Not Use with DC voltage.


    Features:

    • Impressive wireless range of up to 1,200 feet through walls
    • Frequency-hopping spread spectrum (FHSS)
    • Improved interference immunity
    • Improved power management for longer battery life
    • Encrypt-RF® Security (Diffie-Hellman Key Exchange + AES-128 CBC for sensor data messages)
    • Stores 2000 to 4000 readings if gateway connection is lost (non-volatile flash, persists through the power cycle)
      • 10-minute heartbeats = ~ 22 days
      • 2-hour heartbeats = ~ 266 days
    • Over-the-air updates
    • Free iMonnit basic online wireless sensor monitoring and notification system to configure sensors, view data and set alerts via SMS text and email


    Applications

    • Current Monitoring
    • Current Usage
    • Amperage monitoring
    • Amp hour meter
    • Breaker panel monitoring
    • Conveyor systems motors
    • Factory management
    • Watt Hour Meter
    • Kilowatt hour Meter


    IMPORTANT - Sensor Operation

    Please note: this sensor requires both an applicable Gateway and iMonnit software to operate. For further information, please refer to the tabs above or related products below.


    Monnit Gateway Options

    An integral component of any IoT network is the gateway. A gateway device allows for data from sensors to be transmitted to the iMonnit software platform.


    Monnit Ethernet Wireless Gateway 4

    Monnit’s Ethernet Gateways allow your Monnit Wireless Sensors to communicate with the iMonnit™ Online Wireless Sensor Monitoring and Notification System without the need for a PC. Simply provide power and plug the gateway into an open Ethernet network port with an internet connection. It will then automatically connect with our online servers, providing the perfect solution for commercial locations where there is an active internet connection.

    Learn more about the Ethernet Wireless Gateway 4>>



    Monnit 4G + Ethernet IoT Gateway

    The ALTA® by Monnit Wireless IoT Gateway combines a 4G LTE CAT-M1/NB2 cellular engine and Ethernet platform with Monnit’s wireless access point network to aggregate and communicate data from Monnit ALTA Wireless Sensors. The ALTA IoT Gateway allows ALTA Sensors to operate on the world’s leading cellular networks and stay connected to the Internet. The gateway uses AC main power but also has redundant power through a battery backup lasting up to 60 hours.

    To meet the global demand for enterprise IoT deployment, the IoT Gateway communicates with the cloud-based iMonnit® monitoring software via cellular transmission, making it ideal for remote locations or where the Internet isn’t available. The RJ-45 Ethernet jack allows local device configuration, diagnostics, and connectivity backup. The IoT Gateway is instrumental in sending sensor notifications via text, email, or call if user-defined conditions are met or exceeded.

    Learn more about the 4G + Ethernet Wireless Gateway 4>>


    Online Sensor Monitoring Software

    iMonnit is a cloud based mobile internet platform and central hub for managing Monnit and ALTA products. All data is secured on dedicated servers operating Microsoft SQL Server. This online user interface is where all your device settings can be arranged, supervised, and modified to reflect your unique environment. OneTemp will look after the activation and setup of your new online iMonnit account free of charge. There is also a free mobile app for you to stay in control at all times. Start with the basic version or upgrade to iMonnit Premiere to enjoy the full features your Monnit experience can offer.


    iMonnit Basic Vs Premiere:

    • Basic - Free with no ongoing costs
      Monnit Basic is included for free with all wireless sensors, providing basic features for you to configure and monitor your sensors online. These basic features only support one network and one registered user on an account.
    • Premiere - Minimal Annual Fee
      iMonnit Premiere allows for enhanced functionality of your wireless sensors and includes an advanced software feature set at a low annual cost. All of iMonnit's advanced features are availble for configuration. You can have more sensors on your account, support multiple users, and view floorplans for all your sensors.

    Learn more about the iMonnit Premier Online Software>>

     


    Technical Information
    Supply voltage 2.0-3.8 VDC (3.0-3.8 VDC using power supply) *
    Current consumption 0.2 μA (sleep mode), 0.7 μA (RTC sleep), 570 μA (MCU idle),
    2.5 mA (MCU active), 5.5 mA (radio RX mode), 22.6 mA (radio
    TX mode)
    Operating temperature range (board circuitry and batteries) -18°C to 55°C (0°F to 130°F) using alkaline
    -40°C to 85°C (-40°F to 185°F) using lithium **
    Optimal battery temperature range (AA) +10°C to +50°C (+50°F to +122°F)
    Integrated memory Up to 3200 sensor messages
    Wireless range 1,200+ ft non-line-of-sight
    Security Encrypt-RF® (256-bit key exchange and AES-128 CTR)
    Weight 3.7 ounces (Without CT)
    Certifications 900 MHz product; FCC ID: ZTL-G2SC1 and IC: 9794A-G2SC1.
    868 and 433 MHz product tested and found to comply with: EN
    300 220-2 V3.1.1 (2017-02), EN 300 220-2 V3.1.1 (2017-02)
    and EN 60950


    *Circuits cannot withstand negative voltage. Please take care when installing batteries.
    **At temperatures above 100°C, it is possible for the board circuitry to lose programmed memory.

    CT Specifications
    0-20 Amp 0-150 Amp
    Absolute max CT current 50 Amps RMS (A rms) 200 Amps RMS (A rms)
    Maximum accurate CT current 20 A rms 150 A rms
    Frequency range 50-100 Hz 50-100 Hz
    Accuracy +/- (2% +.07 A rms)** +/- (2% + .4 A rms)**
    Calibrated accuracy with appropriate offset +/- (1% + .035 A rms)** +/- (1% + .2 A rms) **
    Offset limits -1.27 to + 1.27 A rms (default set to +0.1 A rms) *** -1.27 to + 1.27 A rms (default set to + 0.3 A rms) ***
    Measurement resolution ~.01 A rms ~0.1 A rms
    Typical Deadband ~0.1 A rms *** ~0.3 A rms***
    Current transducer dimensions 40 mm x 25 mm x 26 mm (10 mm inner diameter) 67 mm x 49 mm x 42 mm (24 mm inner diameter)
    Weight 2.10 ounces (CT only) 7.27 ounces (CT only)
    Lead Length 3 feet 3 feet


    *Circuits cannot withstand negative voltage. Please take care when installing batteries.

    **CTs are inherently less accurate at or below 10% of max range. For best calibration results calibrate at a current between 30% and 90% of max
    accurate range.

    ***Because of a diode inherent to the hardware, the sensor is incapable of reading between 0 and the deadband value. This diode also creates an
    offset. To account for this, the firmware uses offset compensation

    Plug & play sensors remotely monitor energy use

    Monnit’s Enterprise AC Current Meters installs quickly to provide insights on machine health or system performance via current usage. These sensors track the minimum, maximum, and average RMS current, as well as amp hours. If power consumption spikes or plummets beyond user-defined limits, an alert is sent via text, email, or call.

    Fluctuating power consumption often indicates that a machine needs maintenance, is nearing the end of its service life, or an unexpected supply issue. These current sensors are also ideal for submetering.

    Monnit’s AC Current Meter measures the RMS current of an alternating current (AC) system using a current transformer (CT) that wraps around the ‘hot’ wire of a two wire (hot, common, ground(optional)) power system. The sensor reports Minimum RMS current, maximum RMS current, average RMS current, and amp hours to the iMonnit system. The iMonnit system is capable of generating watt hour or kilowatt hour readings as well. The AC Current Meters are available with an option current transducers;

    • Low Current: 0-20 amp 
    • Medium Current: 0-150 amp


    Get amperage alerts

    To measure current, clip the CT around only a single wire of the AC system (clipping around a hot and neutral wire at the same time will result in 0 current readings). After the sensor powers on and connects to the gateway it will begin taking measurements based on the averaging interval (5 seconds default). It will report data to iMonnit every heartbeat or if the current goes outside of the aware thresholds set in iMonnit. The sensor reports amp hours, max RMS current, min RMS current, and average RMS current. iMonnit can also generate watt hour or kilowatt hour readings if a default RMS voltage is set in iMonnit. The AC Current meter can also:

    • Data logging for accumulated amp hour readings 
    • Can notify based on current levels or changes in current levels 

    The AC Current Meters come standard with two replaceable AA batteries. The typical battery life is approximately 10 years.

    WARNING: This AC current meter is for monitoring AC voltage only. Do Not Use with DC voltage.


    Features:

    • Impressive wireless range of up to 1,200 feet through walls
    • Frequency-hopping spread spectrum (FHSS)
    • Improved interference immunity
    • Improved power management for longer battery life
    • Encrypt-RF® Security (Diffie-Hellman Key Exchange + AES-128 CBC for sensor data messages)
    • Stores 2000 to 4000 readings if gateway connection is lost (non-volatile flash, persists through the power cycle)
      • 10-minute heartbeats = ~ 22 days
      • 2-hour heartbeats = ~ 266 days
    • Over-the-air updates
    • Free iMonnit basic online wireless sensor monitoring and notification system to configure sensors, view data and set alerts via SMS text and email


    Applications

    • Current Monitoring
    • Current Usage
    • Amperage monitoring
    • Amp hour meter
    • Breaker panel monitoring
    • Conveyor systems motors
    • Factory management
    • Watt Hour Meter
    • Kilowatt hour Meter


    IMPORTANT - Sensor Operation

    Please note: this sensor requires both an applicable Gateway and iMonnit software to operate. For further information, please refer to the tabs above or related products below.


    Picture of Monnit Enterprise AC Current Meter (20Amp)
    Monnit Enterprise AC Current Meter (20Amp)
    This low power AC Current Meter remotely audits power consumption. The electric power draw of servers, vending machines, or workout machines can all be monitored using this device
    Part Number: MNS2-4-W2-CM-020
    $434.00 ex GST
    i h
    Picture of Monnit Enterprise AC Current Meter (150Amp)
    Monnit Enterprise AC Current Meter (150Amp)
    This medium power AC current meters allows remote monitoring of power consumption. This device can monitor the power draw machines like ATM’s, multiple computer systems, or a baler.
    Part Number: MNS2-4-W2-CM-150
    $492.00 ex GST
    i h
    Related products
    Picture of iMonnit Cloud Sensor Management Software

    iMonnit Cloud Sensor Management Software

    iMonnit Basic & Premiere Wireless Web Based Sensor Monitoring and Notification Systems.
    $0.00 (ex gst)
    Picture of Monnit IoT Gateway (4G)

    Monnit IoT Gateway (4G)

    The ALTA® by Monnit Wireless IoT Gateway combines a 4G LTE CAT-M1/NB2 cellular engine and Ethernet platform (commercial only) with Monnit’s wireless access point network to aggregate and communicate data from Monnit ALTA Wireless Sensors.
    $958.00 (ex gst)
    Picture of Monnit Ethernet Gateway

    Monnit Ethernet Gateway

    The MonnitLink Ethernet gateway allows your Monnit Wireless Sensors to communicate with the iMonnit™ Online Wireless Sensor Monitoring and Notification System without the need for a PC
    $613.00 (ex gst)

    Quality Guaranteed

    Information
    My account
    Customer service

    Safe & Secure Payments

    Quality Guaranteed

    Copyright © 2024 Onetemp. All rights reserved.