alta-output-controller
 

Holiday Closure: We will be closed from Mon, 23rd Dec & will return on Thurs, 2nd Jan 2025

Holiday Closure: We will be closed from Mon, 23rd Dec & will return on Thurs, 2nd Jan 2025

Menu
Search
Search Our Catalogue Close
Shopping cart Close
Menu Close
All Categories

    Monnit Commercial Wireless Output Controller

    Monnit's Wireless Control allows a user to control two separate power relays, all through the iMonnit online sensors portal. Automatically control motors or electrical devices when a condition is detected by a sensor or group of sensors
    Part Number: MNO2-4-CTL-XX
    Manufacturer:
    0Types Available
    Back to Previous Page
    Product Files

    Monnits Wireless Control allows a user to control two separate power relays, all through the iMonnit online sensors portal. Automatically control motors or electrical devices when a condition is detected by a sensor or group of sensors. Relays can also be controlled manually through the online portal or mobile app.


    Product Features

    • 2 x Relay Outputs
    • 10 Amp or 30 Amp Models

    Suggested Application Uses for This Sensor

    • Control
    • Automated Systems
    • Sprinkler Systems
    • Sump and Water Pumps
    • Manufacturing


    IMPORTANT - Sensor Operation

    Please note: this sensor requires both an applicable Gateway and iMonnit software to operate. For further information, please refer to the tabs above or related products below.


    Monnit Gateway Options

    An integral component of any IoT network is the gateway. A gateway device allows for data from sensors to be transmitted to the iMonnit software platform.


    Monnit Ethernet Wireless Gateway 4

    Monnit’s Ethernet Gateways allow your Monnit Wireless Sensors to communicate with the iMonnit™ Online Wireless Sensor Monitoring and Notification System without the need for a PC. Simply provide power and plug the gateway into an open Ethernet network port with an internet connection. It will then automatically connect with our online servers, providing the perfect solution for commercial locations where there is an active internet connection.

    Learn more about the Ethernet Wireless Gateway 4>>



    Monnit 4G + Ethernet IoT Gateway

    The ALTA® by Monnit Wireless IoT Gateway combines a 4G LTE CAT-M1/NB2 cellular engine and Ethernet platform with Monnit’s wireless access point network to aggregate and communicate data from Monnit ALTA Wireless Sensors. The ALTA IoT Gateway allows ALTA Sensors to operate on the world’s leading cellular networks and stay connected to the Internet. The gateway uses AC main power but also has redundant power through a battery backup lasting up to 60 hours.

    To meet the global demand for enterprise IoT deployment, the IoT Gateway communicates with the cloud-based iMonnit® monitoring software via cellular transmission, making it ideal for remote locations or where the Internet isn’t available. The RJ-45 Ethernet jack allows local device configuration, diagnostics, and connectivity backup. The IoT Gateway is instrumental in sending sensor notifications via text, email, or call if user-defined conditions are met or exceeded.

    Learn more about the 4G + Ethernet Wireless Gateway 4>>


    Online Sensor Monitoring Software

    iMonnit is a cloud based mobile internet platform and central hub for managing Monnit and ALTA products. All data is secured on dedicated servers operating Microsoft SQL Server. This online user interface is where all your device settings can be arranged, supervised, and modified to reflect your unique environment. OneTemp will look after the activation and setup of your new online iMonnit account free of charge. There is also a free mobile app for you to stay in control at all times. Start with the basic version or upgrade to iMonnit Premiere to enjoy the full features your Monnit experience can offer.


    iMonnit Basic Vs Premiere:

    • Basic - Free with no ongoing costs
      Monnit Basic is included for free with all wireless sensors, providing basic features for you to configure and monitor your sensors online. These basic features only support one network and one registered user on an account.
    • Premiere - Minimal Annual Fee
      iMonnit Premiere allows for enhanced functionality of your wireless sensors and includes an advanced software feature set at a low annual cost. All of iMonnit's advanced features are availble for configuration. You can have more sensors on your account, support multiple users, and view floorplans for all your sensors.

    Learn more about the iMonnit Premier Online Software>>

     


    Technical Information

    Control Unit Relays

    10-Amp Units

    30-Amp Units
    Initial Contact Resistance Max. 100 mΩ Max. 50 mΩ
    Max Switching Power (resistive load) 2500VA 150W (NO)
    1662VA 150W (NC)    		 8310VA (30A 277VAC)
    Max Switching Voltage 250 VAC, 100 VDC (0.5A) 277 VAC
    Max Switching Current 10A (AC), 5A (DC) 30A
    Nominal Operating Power 360 mW Approx 800 mW
    Operate Time (at nominal voltage / 20°C) Max 10 ms Max 20 ms
    Release Time (at nominal voltage / 20°C) Max 10 ms Max 10 ms
    Max Operating Speed 20 times/min
    (at nominal switching capacity)    		 20 times/min
    (at nominal switching capacity)
    Number of Relays 2 (individually controlled)
    Control Activation - Automatic based on sensor notification settings
    - Manual through iMonnit online software
    Input Power 5.5 VDC @ 900 mA
    Antenna Connector: SMA
    Gain (dBi): 3.0
    Indicator Lights Four LED indicators
    - Power
    - Radio (RF) communication
    - Relay 1 status (On/Off)
    - Relay 2 status (On/Off)
    Enclosure ABS Plastic
    UL94V-0 flame rating
    Dimensions 5.5 x 3.355 x 1.25 in.
    (139.7 x 85.217 x 31.75 mm)
    Weight 8 ounces
    Wireless Range 1,000+ ft. non-line-of-sight ***
    Security Encrypt-RF™ (256-bit key exchange and AES-128 CTR)
    Operating Temperature -40° to +85° C (-40° to +185° F)
    Certifications: 900 MHz product; FCC ID: ZTL- RFSC1 and IC: 9794A-RFSC1.
    868 and 433 MHz product tested and found to comply with:
    CISPR 22:2008-09 / EN 55022:2010 - Class B and ETSI EN 300
    220-2 V2.4.1 (2012-05).

    Monnits Wireless Control allows a user to control two separate power relays, all through the iMonnit online sensors portal. Automatically control motors or electrical devices when a condition is detected by a sensor or group of sensors. Relays can also be controlled manually through the online portal or mobile app.


    Product Features

    • 2 x Relay Outputs
    • 10 Amp or 30 Amp Models

    Suggested Application Uses for This Sensor

    • Control
    • Automated Systems
    • Sprinkler Systems
    • Sump and Water Pumps
    • Manufacturing


    IMPORTANT - Sensor Operation

    Please note: this sensor requires both an applicable Gateway and iMonnit software to operate. For further information, please refer to the tabs above or related products below.


    Picture of Monnit - Wireless Control - Commercial 10 Amp
    Monnit - Wireless Control - Commercial 10 Amp
    Part Number: MNO2-4-CTL-10
    $967.00 ex GST
    i h
    Picture of Monnit - Wireless Control - Commercial 30 Amp
    Monnit - Wireless Control - Commercial 30 Amp
    Part Number: MNO2-4-CTL-30
    $1,034.00 ex GST
    i h
    Related products
    Picture of iMonnit Cloud Sensor Management Software

    iMonnit Cloud Sensor Management Software

    iMonnit Basic & Premiere Wireless Web Based Sensor Monitoring and Notification Systems.
    $0.00 (ex gst)

    Quality Guaranteed

    Information
    My account
    Customer service

    Safe & Secure Payments

    Quality Guaranteed

    Copyright © 2024 Onetemp. All rights reserved.