VCP TITS/B - Immersion Temperature Transmitters

The immersion temperature transmitters TITB / TITS are used for acquiring the temperature of water, liquid or gaseous media (e.g. heating water) in heating, ventilation and air conditioning systems.

The TITB/TITS are active immersion temperature transmitters with
0-10 Vdc or 4-20 mA output.

Features

• Active transmitters 0-10 Vdc or 4-20 mA output 
• With or without display
• 8 different temperature ranges in same unit, selectable via jumpers on pcb:
  • -20°C to +150°C,
  • -50°C to +50°C,
  • -20°C to +80°C,
  • -30°C to +60°C,
  • 0 to +40°C,
  • 0 to +50°C,
  • 0 to +100°C, 
  • 0 to +150°C and
  • Other temperature ranges on request
• Standard probe/pocket length 100 mm On request 50, 150, 200, 250 or 300 mm probe lenghts
• Pockets in brass (TITB) up to 16 bar / 0 +150°C and pockets in stainless steel (TITS) up to 40 bar / +600°C
• Pocket thread connection G1/2“
• IP65 enclosure with quick locking screws

The power supply for immersion temperature transmitters TITB / TITS with 4-20 mA output is 15-36 Vdc and the power supply for immersion temperature transmitters TITB / TITS with 0-10 Vdc output is 24 Vac/dc.

The active immersion temperature transmitters TITB / TITS with output 0-10 Vdc and 4-20 mA have a PT1000 sensor (DIN EN 60751, class B).

The sensing element for the immersion temperature transmitters TITB / TITS is located in the end of the probe.

Immersion temperature transmitters TITB / TITS have IP65 enclosure.

TITB / TITS immesion temperature transmitters have 4 quick locking screws in the cover of the enclosure.

Wiring connection for immersion temperature transmitters TITB / TITS is inside the ABS plastic enclosure on a terminal block.

The enclosure of immersion temperature transmitters TITB / TITS is supplied with a plastic cable entry gland M 16 x 1.5, including strain relief.

TITB / TITS immersion temperature transmitters can be supplied with or without LCD display.

Standard probe / pocket lenght for immersion temperature transmitters TITB / TITS is 100 mm and on request the immersion temperature transmitters TITB / TITS can be supplied with probe / pocket lenghts 50, 150, 200, 250 and 300 mm.

The probe of immersion temperature transmitters TITB / TITS is made of quality steel.

The immersion temperature transmitters TITB-versions are supplied with brass pocket for operation pressures up to 16 bar and temperature up to 0 +150°C

The immersion temperature transmitters TITS-versions are supplied with stainless steel pocket for operation pressures up to 40 bar and temperature up to +600°C

The pockets of the immersion temperature transmitters TITB /T ITS have G1/2” threaded connector.