VCP TSTH - Strap-On Temperature Transmitters

The strap-on temperature transmitter TSTH is used for used for temperature sensing on pipework (e.g. cold-water and hot-water), or on heating sections for heating system control for connection to a building management system

Features

• Active transmitters 0-10 Vdc or 4-20 mA output
• With or without display
• 8 different temperature ranges in same unit,
• selectable via jumpers on pcb
  • -20°C to +150°C,
  • -50°C to +50°C,
  • -20°C to +80°C,
  • -30°C to +60°C,
  • 0 to +40°C,
  • 0 to +50°C,
  • 0 to +100°C and
  • 0 to +150°C.
  • other temperature ranges on request
• IP65 enclosure with quick locking screws
• Including strap-on band 300 mm length for pipes with diameter 13 to 92 mm (1/4 to 3”)

The power supply for strap-on temperature transmitter TSTH with 4-20 mA output is 15-36 Vdc and the power supply for strap-on temperature transmitter TSTH with 0-10 Vdc output is 24 Vac/dc.

The active strap-on temperature transmitter TSTH with output 0-10 Vdc and 4-20 mA have a PT1000 sensor (DIN EN 60751, class B).

Strap-on temperature transmitters TSTH have IP65 enclosure.

TSTH strap-on temperature transmitters have 4 quick locking screws in the cover of the enclosure.

Wiring connection for strap-on temperature transmitter TSTH is inside the ABS plastic enclosure on a terminal block.

The enclosure of strap-on temperature transmitter TSTH is supplied with a plastic cable entry gland M 16 x 1.5, including strain relief.

TSTH strap-on temperature transmitter can be supplied with or without LCD display.

The strap-on temperature transmitters TSTH is provided with a clamp that adapts to the pipe surface and the unit is fixed with an adjustable 300 mm strap-on band, other strap-on band lengths are available on request.