Technical Information
|
Parameters |
m³/h, l/min (1000 mbar, 20 °C) in case of compressed air or Nm³/h, Nl/min (1013 mbar, 0 °C) in case of gases |
Units adjustable via keys at display |
m³/h, m³/min, l/min, l/s, ft/min, cfm, m/s, kg/h, kg/min, g/s, lb/min, lb/h |
Sensor |
Thermal mass flow sensor |
Measured medium |
Air, gases |
Gas types are adjustable over CS service software or CS data logger: |
Air, nitrogen, argon, CO2 |
Measuring range |
See table above |
Accuracy: (o. M. V. = of measured value) (o. F. S. = of full scale) |
± 1.5% of m.v. ± 0.3 % of f.s. on request: ± 1% of m.v. ± 0.3% of f.s. or ± 6% of m.v. ± 0.5% of f.s |
Pressure measurement |
0…16 bar, accuracy: 1%, or 10…2000 mbar (abs) |
Operating temperature |
-20…60 °C |
Operating pressure |
Up to 16 bar |
Digital output |
RS 485 interface, (Modbus-RTU), M-Bus (optional) Ethernet interface or PoE |
Analogue output |
4…20 mA for m³/h or l/min |
Pulse output |
1 pulse per m³ or per litre electrically isolated. Pulse weight can be set on the display. Alternatively, the pulse output can be used as an alarm relay |
Supply |
18…36 VDC, 5 W |
Burden |
< 500 Ω |
Housing |
Polycarbonate (IP 65) |
Measuring section |
Aluminium |
Connection thread of measuring sections |
G 1/4" to G 2" (BSP British Standard Piping) or 1/2" to 2" NPT thread |
Mounting position |
any |