CCS WattNode Meter Module - For Modbus

The WattNode^® Module for Modbus^® is a kilowatt hour (kWh) energy and power meter with ANSI C12.1 and ANSI C12.20 class 0.5 accuracy. Designed for easy customization for nearly any application or type of equipment, the WattNode Module provides bidirectional energy and power readings via an RS-485 port using Modbus RTU communications.  The WND-M1-MB meter measures 1, 2, or 3 phases, in delta or wye services, from 120 to 600 Vac. It is packaged in a compact, DIN-rail mount enclosure. Current transformers are available in various opening sizes with ratings from 5 to 6,000 amps. The Module is instrument powered from 6-24 Vdc or from an isolated 12-24 Vac control transformer.  The optional MDR-10-12 DIN Rail Power Supply  can power up to 12 WND-M1-MB meters.

MEASUREMENTS

• Supports floating-point and integer registers
• Active (real) power: watts, individual meter elements and sum of elements
• Reactive power: VARs, individual meter elements and sum of elements
• Power factor: individual meter elements and sum of elements
• Active (real) energy: kilowatt-hours (kWh), individual meter elements and sum of elements; net, positive, and negative
• Reactive energy: kVAR-hours, individual meter elements and sum of elements; net, positive, and negative
• AC line frequency (Hz)
• RMS voltage line-to-neutral: V_AN, V_BN, V_CN
• RMS voltage line-to-line: V_AB, V_BC, V_CA
• RMS current: CT1, CT2, CT3
• Demand: individual meter elements and sum of elements
• Peak demand sum: minimum and maximum
• Apparent power demand

DIAGNOSTIC LEDS

Diagnostic LEDs provide a per-phase indication of line voltage and power (green flashing) and negative power (red flashing) to help troubleshoot connection problems, like reversed CTs. The WattNode Module for Modbus meter also has a red/yellow/green communication LED to indicate traffic, configuration problems, bus contention, and other conditions. See the manual for full descriptions.

WATTNODE^® MODULE FOR MODBUS^® – FEATURES

WND-M1-MB	FEATURES
	Meets ANSI C12.1 and ANSI C12.20 Class 0.5 revenue metering standards
	Small form factor for easy installation inside most electrical panels, see a sample installation diagram
	Pluggable screw terminals for easy wiring
	0.5% accuracy nominal (see manual for details)
	True RMS power even with leading or lagging power factor and chopped or distorted waveforms
	Measure variable speed drive pumps and motors
	Safe CT’s (Current Transformers), output 0.333 Vac at rated current. Split core CTs for quick installation Solid core CTs are less expensive and prevent tampering CTBL large split-core CTs for high currents (standard and custom sizes) CTRC Rogowski Coils for tight spaces where rigid CTs do not fit
	UL, cUL Listed – Designed and tested for safety and use throughout North America.
	Assembled in USA, qualified under the Buy American provision in the American Recovery and Reinvestment Act of 2009 (ARRA).
	Five year warranty
	Compact, DIN-rail mount design
	Instrument powered from 6-24 Vdc or a isolated 12-24 Vac source